camera return signal 2011 dodge

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

dion

Junior Member
Joined
Jun 6, 2019
Posts
2
Reaction score
0
Location
alberta
Ram Year
2012
Engine
6.7l
Hello I have 5 wires already in my 2011 dodge. It was previously connected to a tailgate cam. Red backup lamp 12v, white copper wire camera signal, white silver wire camera return, camera shield , ground. Most aftermarket cams have 4 wires if you take the rca connectors apart. The only extra I have is The camera return line. Just wondering what that hooks to?
 

Earl R Acker

Junior Member
Joined
Jan 27, 2020
Posts
3
Reaction score
0
Location
Pa
Ram Year
2011
Engine
5.7
Did u ever figure this out i am having same issue and do u have 12v power at the red wire on the plug while truck is in reverse? I dont and that could be my whole problem...fuse is not bad
 
Back
Top