Catch Can

[Bscanlon64]

I know my 05 has an internal PCV, but I've often considered running one between the that hose that runs from the intake to the oil fill neck. Always seems to be oily. Anyone done this? Thanks.


Sent from my iPhone using Tapatalk

 

[hemihustlin]

Im just gonna put a breather on the fill neck and plug the intake side hole

 

[audio1der]

Im just gonna put a breather on the fill neck and plug the intake side hole

(real question here, not sarcasm) What will that accomplish? What happens to all the nasty, oily air (full of condensation all winter)?

 

[ryss003]

I got 1 from amazon not too long ago, It was the upr billet aluminum catch can for the 2013-14 ram hemi. they have it on stock comes with all the hoses and z brackets.


Sent from my iPhone using Tapatalk

 

[hemihustlin]

(real question here, not sarcasm) What will that accomplish? What happens to all the nasty, oily air (full of condensation all winter)?

To be honest i dont belive i have very much oil residue that come through the tube. I know of a few hemis that have oil residue all over air filter or at least make a dark spot on one part but i checked my air filter (stock) 3 or 4 times this summer and it was always free of oil residue. Havent checked it since its been cold. Also my intake tube was nice and clean the time i took it apart.

But at the same time whatever vapors are circulating through i dont want them in my intake. Assuming the internal pcv is doing its job correctly most vapors are going strait though to the intake manifold but i still want to minimize the effect.
Also deleting the hose that runs across from the oil fill all the way to the air filter will bring me some aesthetic pleasure haha

 

[Ramguy65]

To be honest i dont belive i have very much oil residue that come through the tube. I know of a few hemis that have oil residue all over air filter or at least make a dark spot on one part but i checked my air filter (stock) 3 or 4 times this summer and it was always free of oil residue. Havent checked it since its been cold. Also my intake tube was nice and clean the time i took it apart.

But at the same time whatever vapors are circulating through i dont want them in my intake. Assuming the internal pcv is doing its job correctly most vapors are going strait though to the intake manifold but i still want to minimize the effect.
Also deleting the hose that runs across from the oil fill all the way to the air filter will bring me some aesthetic pleasure haha

This is more of a 4th gen issue. Not sure why. My 09 would catch a lot of oil in a few weeks. Mind you I drove it pretty hard so that didn't help.

 

[xXAvroArrowXx]

I got 1 from amazon not too long ago, It was the upr billet aluminum catch can for the 2013-14 ram hemi. they have it on stock comes with all the hoses and z brackets.


Sent from my iPhone using Tapatalk

How does the UBR compare to the BT? Similar internal design?

Sent from my Nexus 7 using Tapatalk

 

[PSYS]

I just did a search and after getting the windows tinted in a couple of weeks, I think the numerous threads I've read on this mod is convincing me I need to do this next.

I've got some newbie questions (sorry in advance!) but is it relatively easy to empty the oil from the catch can?

Also, I would assume the oil dispersed into the can is junk/dirty oil?

Next, aside from saving the engine from the recycled/dirty oil/moisture heading back into the intake, are there any other benefits? i.e., fuel efficiency, etc, etc.

Lastly, is this a relatively easy mod to install...?

 

[Lhemi]

I just did a search and after getting the windows tinted in a couple of weeks, I think the numerous threads I've read on this mod is convincing me I need to do this next.

I've got some newbie questions (sorry in advance!) but is it relatively easy to empty the oil from the catch can?

Also, I would assume the oil dispersed into the can is junk/dirty oil?

Next, aside from saving the engine from the recycled/dirty oil/moisture heading back into the intake, are there any other benefits? i.e., fuel efficiency, etc, etc.

Lastly, is this a relatively easy mod to install...?

Yes nasty oil that you dump out, do not put it back into your truck.
Yes TB and oil octane isn't dirty or reduced. No noticible milage increase.
Very easy to install, on the 2012 there is 2 locations were you can install the z bracket, I choice the lower one, to me gravity should help pull the nasty stuff to the can.
Ask as many questions as you like. That's how we learn...

 

[Nutshell]

I have a BT can. They made me wait 7 weeks for it. They were upfront and honest when I called. My thought was, if they are in this much demand, must be quality. I have to say, it looks good.

 

[PSYS]

Appreciate the replies, you guys!!

I guess the next mod will be the BT catch can.

 

[smarsmar101]

Mine should be shipped out this week or next from what matt told me.... I'm hoping.

 

[Nutshell]

Mine should be shipped out this week or next from what matt told me.... I'm hoping.

Keep hope alive!!!!!

 

[PSYS]

Catch Can = ORDERED! *w00t!*

 

[smarsmar101]

Just got mine in today... Took about 2 1/2 weeks from day I ordered. Just a heads up to anyone that put an order in. That's your timeline.

 

[Hemi450hp]

Just got mine in today... Took about 2 1/2 weeks from day I ordered. Just a heads up to anyone that put an order in. That's your timeline.

We actually received 40 catch cans this week, and have another 40 that will be here Wednesday. As of right now, all catch cans orders have been shipped, and we have 2 cans in stock that can ship today. Next week, we will have more than 40 catch cans in stock and ready to ship same day. Billet Tech is finally caught up, and it looks like the extended backorders are officially over.

 

[blackout11]

LOL billet tech is never caught up they are always busy heidi and nick are at challenger fest now but with great work comes a wait but its so worth it they flew up here for my birthday and shes making me valve covers for my present not to many rams maybe 2 have billet tech valve covers and coil packs cant wait.

For any one that wants a catch can i will be selling my b/t black one in a few days since they made me a custom one for my truck ill prob sell it for 100 bucks

 

[saintsreturn]

LOL billet tech is never caught up they are always busy heidi and nick are at challenger fest now but with great work comes a wait but its so worth it they flew up here for my birthday and shes making me valve covers for my present not to many rams maybe 2 have billet tech valve covers and coil packs cant wait.

For any one that wants a catch can i will be selling my b/t black one in a few days since they made me a custom one for my truck ill prob sell it for 100 bucks

Pm me when your ready to sell


Sent from my iPhone using Tapatalk

 

[blackout11]

Pm me when your ready to sell


Sent from my iPhone using Tapatalk

cant pm lol but ill hit you up on here

 

[audio1der]

Hey Matt/others,
Is there a specific height, in relation to the PCV valve, that a can should be mounted at? Higher? Lower? Equal plane?