Control arm advice?

[john_hawkeye]

I’d leveled my 4x2 truck a while back and now it’s time to change my ball joints. Should I look for control arms designed for a 1.75 level or can I safely go back with stock arms?

 

[Maxtrac Suspension]

We offer forged aluminum uniball upper control arms for the 09+ Ram 1500. They will work with stock height, leveled and lifted setups. I don't know what your budget is but you can check them out here if you'd like...

http://www.maxtracsuspension.com/2009-2018-ram-1500-2wd-4wd-forged-upper-cntrl-arm-w-fk-uniball.html

 

[john_hawkeye]

Yeah, $700+ is a bit much.


2013 Ram SLT 4x2
4.7L v8
K&N intake filter
Readylift level kit
Unknown bug guard
Debadged tailgate
Zombie Response Team badge
Sport grille insert
Tekonsha brake module
Cobra 29 LTD Classic, Astatic mic
Flowmaster 40
Ortego Customs mud flaps
Hadley H00977N air horn system

Fb: Triparish Auto Club
IG- the_sneauxman

 

[Ratket]

https://www.roughcountry.com/dodge-...MI5MSphuP73wIVmSCtBh30HQweEAQYASABEgIzTPD_BwE

https://www.amazon.com/Readylift-67...ocphy=1013433&hvtargid=pla-491643139130&psc=1



http://zoneoffroad.com/zone-offroad-products-control-arms-ram/d2301

Their are a lot of aftermarket UCA”s available. Ranging from stock geometry to a altered geometry to accommodate lift. I posted three different ones that would work with your application. Since you are only leveled with a 1.75 you may want to stay away from the rough country because they are angled for a 3” Kit.