do the bilstein 6112s with their springs settle?

[cityredneck]

does anyone know if the 6112s and the springs that come with them settle?

if so, how much do they settle?

i prebuilt my 6112s saturday to make the swap quicker when i go to put them on. i set them at the 2.8 inch lift setting.

my truck measurements stock is front 36 driver and 36 3/8 on passenger side.

the rear is 39 3/8 driver and 39 1/4 passenger.

wondering if the fronts will settle a little bit or if i should set to 2.1 inch.

thanks

 

[Quick_Shifter]

does anyone know if the 6112s and the springs that come with them settle?

if so, how much do they settle?

i prebuilt my 6112s saturday to make the swap quicker when i go to put them on. i set them at the 2.8 inch lift setting.

my truck measurements stock is front 36 driver and 36 3/8 on passenger side.

the rear is 39 3/8 driver and 39 1/4 passenger.

wondering if the fronts will settle a little bit or if i should set to 2.1 inch.

thanks

I would set them at 2” that will give you the level appearance. Yes they will settle over time but not much.

 

[ram1500rsm]

They should all settle some. with 2.8 front you'll want at least 1-1.5" lift in th back as well, so prob good idea to set them one notch down if you plan to keep your rear at factory height.

 

[Karate_champ20]

I had the old 6112’s set at 2.6” lift. They settled at just about 2” which was a little disappointing. Considering I put their rear springs and shocks on also. Fronts fender well went from 36.5 to 38.5. Rears were 39.25 and went to 40.