Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Mpgrimm2 is your guy, I don't have the link off hand but he should be in the for sale or vendor section somewhere.Have a big Horn and installed modifystreet projectors. Had quad lights. Need harness made or wires to go from under fuse box to the red drl wire on the headlight
Need harness made or wires to go from under fuse box to the red drl wire on the headlight
Click here: M² ModsMpgrimm2 is your guy, I
You can pre-check the plug under the fuse block, look for:I can't find it in his vender page.
So if I am adding the OEM projectors to my truck, do I still need these 2 pigtails going to the OEM projectors? I already bought them from Mpgrimm2 but not sure where the ends that have no connectors go to on the OEM projectors ....You can pre-check the plug under the fuse block, look for:
PIN 8 - LEFT DRL LAMP DRIVER
PIN 23 - RIGHT DRL LAMP DRIVER
These are the ones for my '15 Outdoorsman, I'm guessing your '16 BigHorn will be the same.
Just PM @Mpgrimm2 and tell him your looking for the Extended Length DRL pigtails. He made them long enough to be one piece from the plug to the headlights. I think they were like 5' & 10' long, tucking the wiring to be out of harm's way is longer than you think...lol. I actually pulled the passenger side wire mostly through the wire loom that runs under the radiator core support.