denfireguy
Junior Member
I have seen several threads about the 7 inch EVIC screen failing by either going blank or flashing. Unfortunately, I have not seen any resolution to the problem.
When this happens, is it the screen itself that is going bad or is it the outboard electronics in the cluster itself that is failing. Or a loose connection? The one thread that had a sort of resolution ruled out a connector. Some have mentioned low battery voltage but mine is fine.
I would appreciate any information on fixing this. I would like to see my trailer brake controller with camping season coming on. The other information would also be handy to have.
TIA for any help.
When this happens, is it the screen itself that is going bad or is it the outboard electronics in the cluster itself that is failing. Or a loose connection? The one thread that had a sort of resolution ruled out a connector. Some have mentioned low battery voltage but mine is fine.
I would appreciate any information on fixing this. I would like to see my trailer brake controller with camping season coming on. The other information would also be handy to have.
TIA for any help.