Wild one
Senior Member
- Joined
- Jan 17, 2016
- Posts
- 17,774
- Reaction score
- 35,091
- Ram Year
- 14 Sport
- Engine
- 5.7
Flyin' Ryan Performance
4h ·https://www.facebook.com/
This is the latest iteration of our CNC Ported G3 Hemi heads . These have been a hot seller as of late, as we are already down to just 1 set of 6.4 heads ready to go.
We are aiming for these to be in stock on a full time basis in 2025, why deal with sending in cores or waiting months for hand porting when you can get a set of these with little to no wait.
We take factory castings, have them blasted, cleaned, competition valve job along with a proven cnc program that is set up for us specifically. Springs are shimmed for severe duty use. Also shown is our Ti retainers available (not standard, but should be starting in Jan)
5.7 castings flow [email protected] lift while 6.4s as shown flow 400cfm.
We realize there are many options on the market especially now with new aftermarket castings available. This is a great offering for those who want something for competition use but either just don't need or can't afford the 5k-7k required for a fully dressed aftermarket casting.
