Gen 4 Aux switch control install

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

wrench78

Member
Joined
May 1, 2024
Posts
43
Reaction score
39
Location
Pottstown
Ram Year
2017
Engine
5.7 Hemi
Thinking about adding a Auxbeam Aux 6 switch setup. I had one in my Jeep and loved it. I need mounting ideas. for the control unit in the cab. I was thinking up by the moon roof switch area but not sure if the headliner could hold the weight. Please post up any pics you have of mounting ideas. Thanks everyone. Trying to put in the least about of holes as possible. (once and done concept.)
 

swine

Senior Member
Joined
Aug 9, 2015
Posts
267
Reaction score
208
Location
NE Indiana
Ram Year
2015
Engine
5.7
1715956416344.png
Edge pillar pod
No drilling.
 

Attachments

  • 1715956339430.png
    1715956339430.png
    165.1 KB · Views: 8

ric221

Senior Member
Joined
Nov 18, 2013
Posts
199
Reaction score
132
Ram Year
2016
Engine
5.7L Hemi
@Badger 13, I like your analog clock. Where did you get it and is it powered by your truck? Nice switches also.
 

Badger 13

Senior Member
Joined
Jul 30, 2018
Posts
1,190
Reaction score
1,163
Location
North Idaho
Ram Year
2013 Dodge Ram 1500
Engine
5.7 Hemi
Thank you. The clock is from Formotion Products. It is battery powered similar to a watch battery. They were originally designed for motorcycle use and came with a small bracket that attached to the back of the clock. I used a piece of heavy leather that I had ling around and friction fitted to that little cubby space in the dash. Drilled a hole through the leather and mounted the clock to it. If I have to change the battery I can just pull out the leather it is mounted on. I see now they also offer item with a "stick on" back as well.

 
Top