Harmonic balancer torque spec

[JJ72]

Hello, newbie here. I am changing the harmonic balancer on my 3.6 and am looking for the correct torque spec. I saw on some random graph it said 30 ft lbs + 105 degree turn (i'm not sure what that means) and a youtube video said it was 130 ft lbs. Please help!

 

[DILLIGAF]

Pdf service manual

Would love one for 2018 1500 for reference if any one has it Bruce

www.ramforum.com

 

[Wild one]

Hello, newbie here. I am changing the harmonic balancer on my 3.6 and am looking for the correct torque spec. I saw on some random graph it said 30 ft lbs + 105 degree turn (i'm not sure what that means) and a youtube video said it was 130 ft lbs. Please help!

You need one of these,they go between the torque wrench/rachet and socket,and it is 30lb-ft as step 1,plus 105 degrees as step 2

https://www.amazon.com/OTC-4554-Drive-Torque-Angle/dp/B003UMRXSW

How to use an angle degree torque gauge, this torque is usually used on torque to yield bolts.- VOTD

This video demonstrates how to use a angle torque or degree torque gauge. These are commonly used when installing cylinder heads, cv axles, and other high to...

www.youtube.com

Torque To Angle | Using a Torque Angle Gauge

Most DIYers may know about torque wrenches and how to use them, but some may not know that there is another way to apply torque to a fastener to get a certai...

www.youtube.com

This is a way to do it with-out an angle gauge,but being as you need 105 degrees,you'll kind of be guessing on the 1/2 way point between 90 and 120 degrees

How to angle degree torque cheat without a special tool, usually used on torque to yield bolts VOTD

In this video I applied angle torque without the special tool. How to use a angle torque tool: https://www.youtube.com/watch?v=8WohM6pt58I-------------------...

www.youtube.com