Taspeace
Member
- Joined
- Jun 14, 2022
- Posts
- 37
- Reaction score
- 34
- Location
- Washington State
- Ram Year
- 2014
- Engine
- 5.7 Hemi
I'm trying to remove the Uconnect 5.0 radio from my 2014 RAM 1500. I've got the rubber cover out of the top of the bezel and removed to two Torx screws that lock the bezel into the frame of the dashboard. The videos I've watched say to then pull on the top of the bezel and it will come off with the AC controls attached to it. Well, I've yanked pretty hard on the bezel. I can hear it creak as the upper left corner flexes a bit, but no other part of the bezel is releasing from the frame of the dashboard. By "pretty hard", I mean as hard as I can without using some kind of tool. Without removing the bezel I can't access the 4 screws that secure the radio into the truck.
Any suggestions for removing the bezel?
Thanks in advance
Any suggestions for removing the bezel?
Thanks in advance