Hemi Oil Filter, 2 part question

[crazykid1994]

so which one is the filter mount for it?

And is the EVIL ENERGY 10FT 10AN 5/8" Nylon Braided CPE Oil Gas Fuel Line Hose End Aluminum Fittings Kit a good one to get with the Trans-Dapt 1127 Oil Filter Relocation Kit?

https://www.amazon.com/EVIL-ENERGY-...HW581JTMBKW&psc=1&refRID=A3AVTTJ8EHW581JTMBKW

The 1127 kit uses a 3/4”-16 thread filter which is the older style ph8a or equal replacement. There is another kit that uses the stock filter thread 22mm-1.5 but I’m not sure of the model for that one. I had one when I ran a vertical filter but swapped to a horizontal filter setup and an running the 8a style filter.

 

[Wild one]

so which one is the filter mount for it?

And is the EVIL ENERGY 10FT 10AN 5/8" Nylon Braided CPE Oil Gas Fuel Line Hose End Aluminum Fittings Kit a good one to get with the Trans-Dapt 1127 Oil Filter Relocation Kit?

https://www.amazon.com/EVIL-ENERGY-...HW581JTMBKW&psc=1&refRID=A3AVTTJ8EHW581JTMBKW

Normally i'd tell you where to go,but i'm in a good mood today,so don't fluck it up.You still need the male 1/2" NPT to male -10 (5/8"s) adapter fittings with that kit,as it looks like it's all female ends,so you'll have nothing to attach to the remote mount or to the filter adapter. You'll need fittings like these. 4 all told

Performance World 8161008 -10AN 1/2" Adapter (performance-world.com)

 

[Wild one]

The 1127 kit uses a 3/4”-16 thread filter which is the older style ph8a or equal replacement. There is another kit that uses the stock filter thread 22mm-1.5 but I’m not sure of the model for that one. I had one when I ran a vertical filter but swapped to a horizontal filter setup and an running the 8a style filter.

I gave him the numbers earlier today in the other thread Khristopher,he's lucky i'm in a good mood,as normally i wouldn't help him out,lol. All he has to do is go look down below,and i bet i won't even get a like from him either,lol

Which Oil Filter Relocation Kit do you have? | Page 10 | DODGE RAM FORUM - Dodge Truck Forums

 

[HEMIMANN]

I gave him the numbers earlier today in the other thread Khristopher,he's lucky i'm in a good mood,as normally i wouldn't help him out,lol. All he has to do is go look down below,and i bet i won't even get a like from him either,lol

Which Oil Filter Relocation Kit do you have? | Page 10 | DODGE RAM FORUM - Dodge Truck Forums

 

[David James]

I use Wix, NAPA Gold, or Purolator Pure One. They are all spec’d for extended changes. I use synthetic whatever is on sale, right now, Shell Rotella Gas 5w20. 5k mile changes and Blackstone Lab analysis indicates that at 77k miles I’m doing something right. No Hemi tick, perfect.

 

[tantore]

The 1127 kit uses a 3/4”-16 thread filter which is the older style ph8a or equal replacement. There is another kit that uses the stock filter thread 22mm-1.5 but I’m not sure of the model for that one. I had one when I ran a vertical filter but swapped to a horizontal filter setup and an running the 8a style filter.

the filter relocating kit is the perma cool 72988 with the 22 mm - 1.5 threads