How To Add rear Park assist

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

SHERMAN ROBBINS

Senior Member
Joined
Oct 6, 2019
Posts
156
Reaction score
77
Location
Dallas
Ram Year
2019
Engine
5.7
These are what I bought off Amazon 3623f9822399477b6b345a701764cdbd.jpg

Sent from my SM-A205U using Tapatalk
c655a6c1-392b-409c-8c47-87bbc04849c6-png.207419
These are confirmed working sensors. I haven't found any from other sellers that work. These actually have the Bosch labeling on sides of sensors the pic is for 8 sensors I believe they are $22.99 for 4.
 

Michael Trevisan

Junior Member
Joined
May 26, 2020
Posts
20
Reaction score
0
Location
Middletown CT
Ram Year
2015
Engine
5.7
So you think could just be bad sensors why I'm getting that error message, and thank you for the help I appreciate anything

Sent from my SM-A205U using Tapatalk
 

SHERMAN ROBBINS

Senior Member
Joined
Oct 6, 2019
Posts
156
Reaction score
77
Location
Dallas
Ram Year
2019
Engine
5.7
So you think could just be bad sensors why I'm getting that error message, and thank you for the help I appreciate anything

Sent from my SM-A205U using Tapatalk
Yes more than likely. I got some sensors from another seller when I installed my system and my truck threw the service park assist message. The way I found out it was the sensors was I did my back sensors first and then the front my back sensors were from a seller who sold me my harness and sensors that where factory. So I took the ones I ordered and put one in the back with the factory sensors and the back then threw the service park assist message. Someone else got the same message when buying sensors from unconfirmed sources.
 
Last edited:
OP
OP
S

skuppy069

Senior Member
Joined
Feb 26, 2017
Posts
795
Reaction score
362
Location
canada alberta
Ram Year
2018 1500 cc
Engine
hemi 5.7
View attachment 208780 I sent this to another member to try out . It’s a first go so will see when its installed if there are any suggestions for improvement etc .
It’s about 150 Canadian in parts roughy and about 8 hours of work .
I made another setup as had enough parts to make one more etc
If some one is interested in adding this setup to there truck let me know .
Got the process down to 6 hours with a wire rack and Some organization


E5E3FC26-D484-4326-85D6-48181FBF7E6A.jpeg
 
Last edited:

Michael Trevisan

Junior Member
Joined
May 26, 2020
Posts
20
Reaction score
0
Location
Middletown CT
Ram Year
2015
Engine
5.7
Ok so I got the rears working but the front sensors the minute I put it into drive it goes double red and aren't working correctly.

Any ideas

Sent from my SM-A205U using Tapatalk
 

Dkloven34

Junior Member
Joined
Apr 17, 2020
Posts
4
Reaction score
0
Location
MI
Ram Year
2013
Engine
6.7
Do you need the u connect 8.4 radio to run the park Sense, I have the ra2 5.0 would it still work ?
 

Idagrizz

Junior Member
Joined
Nov 1, 2015
Posts
2
Reaction score
0
Ram Year
2014
Engine
6.7
Skuppy do you still have the wire setup available?
 

Brad360

Junior Member
Joined
Apr 4, 2017
Posts
10
Reaction score
0
Ram Year
2017
Engine
5.7
Ok Guys a little help and advice please, no matter how I set the setting I still have the Off message in the front of the truck is this normal? I turned off everting short of park tronics... What should the normal setting be? it works with every thing OFF as of now I only have the sound and part T on. Please advise gents

214973-e599d22358db2ab0e98bb910a42cd70f.jpg

PARK.jpg
 

Michael Trevisan

Junior Member
Joined
May 26, 2020
Posts
20
Reaction score
0
Location
Middletown CT
Ram Year
2015
Engine
5.7
Okay need a little help I am getting every check engine light and sensor malfunctioning due to lost communication to the bcm sense installing park sense and it's saying can bus C negative is the problem

Thanks for any help

Sent from my SM-A205U using Tapatalk
 

SRich2015

Senior Member
Joined
Jul 23, 2017
Posts
269
Reaction score
119
Location
USA
Ram Year
2018
Engine
6.7 Cummins
Okay need a little help I am getting every check engine light and sensor malfunctioning due to lost communication to the bcm sense installing park sense and it's saying can bus C negative is the problem

Thanks for any help

Sent from my SM-A205U using Tapatalk

Did you check your ground at the can bus block coming from the park module?


Sent from my iPhone using Tapatalk
 
Top