I hook up aftermarket subs

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Chichipu0112

Junior Member
Joined
Feb 13, 2019
Posts
1
Reaction score
0
Location
Ohio
Ram Year
2017
Engine
Diesel

Can anyone help me I installed an after market subs and the bass sounds really bad I taped my loc from the existing alpine sub it seems like the frequency is to high
 

ErnieBoling

Senior Member
Joined
Dec 7, 2018
Posts
251
Reaction score
222
Location
South East Texas
Ram Year
2014
Engine
6.7L Cummins

Can anyone help me I installed an after market subs and the bass sounds really bad I taped my loc from the existing alpine sub it seems like the frequency is to high

I wouldn't recommend using the Factory Sub wires for your signal. Tap into the signal wires inside the side panel next to the front seats.
 

TomT

Senior Member
Supporting Member
Joined
Jul 1, 2015
Posts
1,259
Reaction score
543
Location
SoCal/OC
Ram Year
2015
Engine
Hemi 5.7
What @ErnieBoling said. The signal from the factory Alpine sub is limited because the factory sub is crap and would explode if fed a full bass range. Some LOCs can compensate for that a bit but your best bet is to pull the signal from elsewhere.
 
Top