Inner Fender contact/solution

[R/T_Fire]

I have what I believe to be a Beltech 2/4 drop... I get excessive rubbing on the inner fender on the right front and little on the left front, So much do I have worn a hole through the inner fender.
I purchased the truck like this and looking on how to remedy this, with either bump stops or taller inner fender (if produced) or custom inner fender I'll fab up out of some 18 ga.

My question is do others have this issue and how did your solve it. I'm open to ideas as fabbing a set of inner fenders is alot of work

 

[TriSum]

I have what I believe to be a Beltech 2/4 drop... I get excessive rubbing on the inner fender on the right front and little on the left front, So much do I have worn a hole through the inner fender.
I purchased the truck like this and looking on how to remedy this, with either bump stops or taller inner fender (if produced) or custom inner fender I'll fab up out of some 18 ga.

My question is do others have this issue and how did your solve it. I'm open to ideas as fabbing a set of inner fenders is alot of work

Do you have the stock size tires? I have the 2/4 BT kit and every once in awhile at full lock and hit a bump do I rub the inner liner, very slightly.

David

 

[bgray]

Yah i have zero rub, anywhere, under all conditions on a 2/4, 22" RT and stock 285/45

Im going down to a 4/6 and expecting rub, but that wont be another 2 weeks. I can update you then with my solution