Led Running lights.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Sootguy

Junior Member
Joined
Jan 7, 2021
Posts
6
Reaction score
1
Location
Long Island
Ram Year
2014
Engine
6.7 Cummins
So I have done my own DIY marker lights on the plastic under my bumper and tapped them into the fog light harness. I have 8 12 volts dc 3/4" led lights they are dimming in and out and flickering. do you think I need to add a resister to the harness?

12+Volt+DC+3+4++Clear+LED+Light_S-1.jpg

12+Volt+DC+3+4++Clear+LED+Light_S.jpg
 

Michael Trevisan

Junior Member
Joined
May 26, 2020
Posts
20
Reaction score
0
Location
Middletown CT
Ram Year
2015
Engine
5.7
I ran led strips under my steps off the dome light. They flicker when I unlock the doors but when I open the door the work correctly.

My guess is the current is low because the lights inside the cab look dim until I open the door. I was thinking about a Resistor too.

Sent from my SM-A205U using Tapatalk
 

VA-RAM

Senior Member
Joined
Nov 17, 2019
Posts
166
Reaction score
106
Location
STL, MO - Norfolk, VA
Ram Year
2017 Laramie / 2020 Laramie
Engine
Hemi 5.7
The strips under my steps are tapped off the inside courtesy light at the plugs under the rear seat bottoms on each side. They actually dim when I lock the truck remotely, just like the interior lights do...
 
Top