LED swap issues

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Azbr06

Junior Member
Joined
Oct 26, 2021
Posts
8
Reaction score
0
Location
Arizona
Ram Year
2017
Engine
6.7
So I have a 2017 2500 and I swapped my bulbs to the Fahren high and low beam LeDs. My issue is the shine off to the passenger side. I know I can adjust up and down but these seem off to the right. Both bulbs are clocked to the 3 and 9 position. Just doesn’t look right and is annoying that the passenger side is lit up and not drivers. Hope you can tell in the photo. Thanks for any info
 

Attachments

  • 05EC1CB6-69C7-4E41-8E4E-7AFEB30A82E9.jpeg
    05EC1CB6-69C7-4E41-8E4E-7AFEB30A82E9.jpeg
    66.2 KB · Views: 12

mtnrider

Senior Member
Joined
Sep 25, 2014
Posts
3,181
Reaction score
3,436
Location
Georgia
Ram Year
2016
Engine
6.7 Cummins
Reflector or projector housings?
 

Hemi395

Senior Member
Joined
Mar 18, 2013
Posts
8,987
Reaction score
15,663
Location
Cape Cod MA
Ram Year
2013
Engine
5.7 Hemi
Did you get the passengers side headlight fully seated into the ball socket? I did that once and it was way off....
 
OP
OP
A

Azbr06

Junior Member
Joined
Oct 26, 2021
Posts
8
Reaction score
0
Location
Arizona
Ram Year
2017
Engine
6.7
It’s reflector. And yes I believe I did get it fully seated. The bracket where the lower bolt goes is broke not sure if that is making a difference. The top bolt is good but no lower bolt.
 
Top