M² Mods Intro & Project List

Discussion in 'M² Mods' started by Mpgrimm2, Feb 11, 2017.

  1. Pucknuts

    Pucknuts Junior Member

    Age:
    45
    Posts:
    4
    Likes Received:
    2
    Joined:
    Dec 3, 2018
    Location:
    Central Oregon
    Ram Year:
    2015
    Engine:
    6.7
    Harnesses are top of the line thanks!

    Sent from my SM-N950U using Tapatalk
     
    Mpgrimm2 likes this.
  2. Mpgrimm2

    Mpgrimm2 Preferred Vendor Supporting Member

    Posts:
    3,629
    Likes Received:
    2,132
    Joined:
    Mar 30, 2014
    Location:
    Anderson, SC
    Ram Year:
    2018 Laramie Crew
    Engine:
    5.7L
    Unfortunately I don't have the time to learn a new harness and order needed parts at the moment.
    Deereguy's day job has him on a special project that's taking up most of his day (since mid December) and will get to everyone's request as best he can time permitting.

    M² Mods.
     
  3. JB1

    JB1 Senior Member

    Posts:
    5,329
    Likes Received:
    3,699
    Joined:
    Nov 3, 2011
    Location:
    Houston, Texas
    Ram Year:
    2017
    Engine:
    Hemi 5.7
    Ok thanks
     
  4. ricky_bobby

    ricky_bobby Junior Member

    Age:
    32
    Posts:
    3
    Likes Received:
    0
    Joined:
    Monday
    Location:
    Wake County, NC
    Ram Year:
    2018
    Engine:
    6.7L Cummins
    Hey guys - not sure of the 30+ pages but do you make a conversion harness for guys going from halogen to Mopar LED tails? A lot of guys able to have sales codes flashed at dealer, or enable the LED tails with AlfaOBD - Basically using these parts and some wire loom -

    1) LED Tail Pigtail Wiring Harness –Available from Mopar Online Parts.
    · P/N 5013984AA – QTY 2

    2) EV6 Male Connectors – Available from InjectorRX (Fuel Injector Cleaning Service, Flow Testing & Outboard fuel injectors).
    · Bosch EV6 Male Connector – QTY 2

    3) H13/9008 Male Pigtails – Available from Autolumination (www.autolumination.com Tail Light Brake Light Turn Signal LED Bulbs).
    · Male Pigtail – QTY 2

    Add some loom and some wire and you have a beautiful conversion harness that isn't $135 - To replace #2, which is the most expensive piece, a guy on the Cumminsforum has shared the following if it helps - (I chimed in there as well) - he talks about cutting off the stock wiring plugs but with the 2 parts above you should be fine with leaving them intact - and with the more affordable "LED tail lamp plug" and pins it may make for a very affordable conversion I am hoping -

    https://www.cumminsforum.com/forum/28856635-post49.html
     
  5. Mpgrimm2

    Mpgrimm2 Preferred Vendor Supporting Member

    Posts:
    3,629
    Likes Received:
    2,132
    Joined:
    Mar 30, 2014
    Location:
    Anderson, SC
    Ram Year:
    2018 Laramie Crew
    Engine:
    5.7L
    Pm sent. (Nope, We generally refer people to The RetroShop)

    M² Mods.
     
  6. Csucsi

    Csucsi Junior Member

    Age:
    54
    Posts:
    1
    Likes Received:
    0
    Joined:
    Monday
    Location:
    Cnj
    Ram Year:
    13
    Engine:
    Cummins
    Hello everybody I’ve been trolling here for about two weeks and I noticed that M2 mods makes harnesses for the seven speed module resister and the single temp zone control bezel thing is there anyway I can get in line for a harness of the long variety for my 13 8.4 conversion truck is 4 speed fan now but I bought the resistor and I am actively seeking a module and the harness also
    I hope I posted this in the right place thanks in advance Tom
     
  7. Mpgrimm2

    Mpgrimm2 Preferred Vendor Supporting Member

    Posts:
    3,629
    Likes Received:
    2,132
    Joined:
    Mar 30, 2014
    Location:
    Anderson, SC
    Ram Year:
    2018 Laramie Crew
    Engine:
    5.7L
  8. phreak480

    phreak480 Junior Member Military Member

    Age:
    35
    Posts:
    23
    Likes Received:
    16
    Joined:
    Sep 14, 2018
    Location:
    East Northport, Ny
    Ram Year:
    2014
    Engine:
    6.7 Cummins
    "TheRetroShop" does great work. Got a sweet projector HID setup for my 03 ram from him and it was fantastic.
     
    Mpgrimm2 likes this.

Share This Page