- Joined
- Oct 29, 2015
- Posts
- 539
- Reaction score
- 485
- Ram Year
- 2022
- Engine
- Hemi eTorque 5.7
Nice pics and write up Northvibe. Makes me want a cargo cam, even if I don’t need it! HaHa!
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
2018 UAx radio?
Nice pics and write up Northvibe. Makes me want a cargo cam, even if I don’t need it! HaHa!
Sent you a private message with detailsHave 2018 Tradesman. Want to put fog lights into bumper. Done a ton of research. Changed out bumper, have fog lights installed, have wire harness installed, have switch installed. Need jumper wire from fog light harness to fuse box. I see that you make these. How do I get one and how do I get in contact with you?
I have heard there may be a setting in the BCM configuration to tell the truck it has a seperate display from the radio/media center module or center stack display. Would need AlfaOBD and OBDLink MX BT go poking around and find it. @00R/T may know what it's called.Hey I know this is a 4th gen thread but do you have any experience with the 5th gen 8.4 to 12 swap? I have it installed but keep getting a black screen except when in reverse and few buttons on radio itself not responding but steering wheel buttons work fine. I’m abt to give up on it.
I’m new to the forum and am looking to get the fog light extension harness for a 2014 Ram 2500 tradesman. Any help would be much appreciated.
What all do I need to add a cargo cam to an 18 with the 8.4 ?
Sent from my iPhone using Tapatalk
Do you already have the Mopar jumper harness between the Foglights in the bumper that the dogs out into (with male 4 pin connector on driver side behind the headlight)?
See pictures in the op of both the Mopar jumper harness and our extension harness. (You need both)
[/URL].