NEED HELP FAST tap and die

[faitdushred]

The guy who put my new wheels on screwed the thread. I have a 2013 ram anyone know what size tap and die I need to fix the threads. It's the first two or three that are all out of whack.


Sent from my iPhone using Tapatalk

 

[faitdushred]

The one on the right you will notice where it's shiny that's where the threads are all bent out of whack


Sent from my iPhone using Tapatalk

 

[MiRamDriver]

Just buy new lug studs if you can. I know the thread pitch is M14.

 

[faitdushred]

I'm way out in the boonies with no vehicle. Was hoping I could use tap and die set just need proper sizing


Sent from my iPhone using Tapatalk

 

[MiRamDriver]

I'm way out in the boonies with no vehicle. Was hoping I could use tap and die set just need proper sizing


Sent from my iPhone using Tapatalk

M14 x 1.5

 

[faitdushred]

Perfect. Thanks


Sent from my iPhone using Tapatalk

 

[faitdushred]

It seems really tight I was just sent back to buddies house to find a 16 x 1.5 but it is for sure 14x1.5 right


Sent from my iPhone using Tapatalk

 

[MiRamDriver]

No problem. Good luck!

 

[Stangshcky12]

Be very careful not to cross thread the die on your studs

 

[The Unabomber]

Drive to civilization and get a new stud.

 

[faitdushred]

I ended up getting 3 screwed up ones back on. I just had my second baby on Friday and I am back and forth between the hospital in town and the boonies taking care of my son while the gf is in the hospital. I have to bring the truck in to get my rack and pinion replaced this week when I can find the time. I am going to get the dealer to replace the studs at that time. Hopefully on their dime seeing how I shouldn't of even been rotating my tires seeing how I just paid them to do an oil change and tire rotation not to long ago and seems as though they tried to get away with not actually rotating my tires.


Sent from my iPhone using Tapatalk