Guga
Junior Member
- Joined
- Oct 24, 2020
- Posts
- 15
- Reaction score
- 9
- Location
- Pitt Meadows, Canada
- Ram Year
- 2020
- Engine
- Hemi 5.7
Hey guys! I have a 2020 1500 Classic, am using AlfaOBD on Windows (v 2.2.8 ) with the OBDLink MX. I can’t update the firmware on the MX because I have an iPhone, so that might solve my issues, but I’ve seen people saying they did and were still having the same issue I have. I also got the bypass harness from Kaodtech and noticed that my CAN module has multiple connections available for it, not only one as the installation instructions said. I just plugged it to the first connection to the left of each CAN module and it seems to be working fine as I was able to adjust my engine hours after upgrading to the 7” EVIC, select my preferred DRL after upgrading from quads to projectors and set my licence plate lights to LED and the error message for it is gone from my cluster. Now to the issue: for the life of me, I can’t change the mileage. Tried multiple times, followed all the steps, waited for the check engine light to stop blinking to hit start, waited 5 mins before turning the key back to run and nothing works although Alfa says the procedure was successful. The Continental logo pops up, the cluster reboots but the mileage doesn’t change. Tried changing from km to miles (I’m in Canada), tried selecting the 3.5” cluster instead of 7, tried entering the mileage with and without the decimal, nothing seems to work. Any thoughts? I saw some people saying they had to try multiple times to get it to work, but I’m on this for two nights in a row for about 15 attempts and nothing. I emailed the AlfaOBD support but in the meantime I wanted to check if you can help me out. TIA.