Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
No, where was it made?Do the wix XP filters normally come with wrapped in plastic, or at least over the open end of the filter?




can you post that? thanksThey already make one with 100% synthetic media, comparable to the FE2.
Made in China/or Vietnam ... I've cut one these filters open awhile back for a peak inside, but don't remember what I seen. I'll have to get another one an take a look at it for arguments sake ...
I’m currently running that P85372 filter on my 2500 6.4 and there is plenty of room for it for both installation and removal.
Vietnam by PGI or some 3 letter company.Made in China/or Vietnam ... I've cut one these filters open awhile back for a peak inside, but don't remember what I seen. I'll have to get another one an take a look at it for arguments sake ...
On the 1500 5.7 the electric steering gear is in way for normal installation.I’m currently running that P85372 filter on my 2500 6.4 and there is plenty of room for it for both installation and removal.
It'll fit. I just installed one on my 2019 classic. It's not as easy, but it's not hard either.On the 1500 5.7 the electric steering gear is in way for normal installation.
Exactly. Come in from front and it works. Funny, I just changed the oil on my 19 classic today with FE2.It'll fit. I just installed one on my 2019 classic. It's not as easy, but it's not hard either.
Technically I'm running the wix 57899xp, but it's the same size filter.
I’m seeing a slight increase in oil pressure at idle 29 vs 31 psi, but maybe within the margin for error.I’m currently running that P85372 filter on my 2500 6.4 and there is plenty of room for it for both installation and removal.