Other use of Home link buttons

[Ramm5.7]

Just to clarify, if I order this AGT device, I can use my home link buttons to turn on/off my green light for the fire department? Or do I need to order something else as well?

Yes. I ended up using...
Pilot Performance Lighting ... https://www.amazon.com/dp/B000BRJF62?ref=ppx_pop_mob_ap_share

Connect your green light wiring to the pilot, power to the pilot and sync remote to homelink. Works great!!

 

[shaner82]

Yes. I ended up using...
Pilot Performance Lighting ... https://www.amazon.com/dp/B000BRJF62?ref=ppx_pop_mob_ap_share

Connect your green light wiring to the pilot, power to the pilot and sync remote to homelink. Works great!!

Thanks. Quick question, where did you get the power from to power the pilot? Do you have to wire it into existing wires, if so, which wires? All this wiring stuff is pretty new to me

 

[Ramm5.7]

I ran a power wire from the battery with a fuse to the power side of the unit. 2 wires from the switch side to my 2 different lights.

 

[firehawk618]

Very cool use of the homelink buttons.

One hang up I have is I'd like to have the relays stay in the state they were in when I turn the truck off and not have to turn the relay on everytime I start the truck.

From what I can see is they only take a 12v input and no ignition sense input so I would imagine they stay on after the ignition is shut off.

Does anyone know of a relay pack that will turn off with the ignition and go back to their original state once the truck is started?

Thanks!

 

[Activate]

I have bought this one :



I have problems with the homelink.
I tried to program homelink cleared the code with button 1 and 3 till it says cleared.
Push the button on the remote and push 1 from the homelink , in the center says it is learned, if I push the button its say sending but nothing is happening?
could it be a problem because the rolling code?

if it is a problem, witch one must I buy for the four channels?

Thanks and greetings,

Erik.

 

[Activate]

It is a rolling code so I will not work....gggrrhhh... I need one with a fixed code...

 

[Activate]

Think I am going to but the one from the Topicstarter the Melife 315 Mhz 4 channel

 

[Activate]

Received the Melife today and still not working...who can help me?

Thanks and greetings,

Erik.