DBaker7777
Junior Member
- Joined
- Nov 7, 2016
- Posts
- 13
- Reaction score
- 7
- Ram Year
- 2016
- Engine
- 5.7
I have a 2016 Ram 1500. I need to check the pins that go into the back of the connector for the main wiring harness for the O2 sensors. In particular Bank 2 Sensor 2. Some of them are difficult to get to as they are way up in the engine. Is there an easier way to disconnect the harness to get it to drop down more to check the pins in the back? Again, this is for the main harness that hooks into the ECU. Thank you in advance.
