P0700 and P2706

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Nathan Stripling

Junior Member
Joined
Oct 16, 2018
Posts
9
Reaction score
0
Location
Fairbanks, AK
Ram Year
2013
Engine
5.7 HEMI
I have a 2004 Ram with the 545RFE. I have had issues with these codes off and on for a few months. Lately it has been getting worse. Once the DTC is set, the transmission kicks into limp mode and I'm stuck in 3rd gear. I know either the TCM, the solenoid or the wiring harness is at fault. I have read previously about people shooting the solenoid wires to either diagnose it or rule it out, but I'm not too familiar with which wires I need to shoot. Any assistance is appreciated. I would hate to throw a solenoid pack at it just to have the problem resurface.
 

SharpMan

Junior Member
Joined
Oct 14, 2019
Posts
1
Reaction score
0
Location
Oklahoma
Ram Year
2004
Engine
4.7
Did you ever figure this issue and what it took to fix it?
 

toyv84x4

Member
Joined
Sep 8, 2014
Posts
52
Reaction score
16
Ram Year
2004
Engine
Hemi 5.7
I have this exact issue and am about to investigate so will update here as to the fix! Hopefully. Should be Wires or MS Solenoid or PCM. Notoriously a pain to diagnose which one. If you want to add you best ideas or most common fault of the three.........?
 

Latest posts

Members online

Forum statistics

Threads
195,469
Posts
2,870,596
Members
156,177
Latest member
joeyoliver45
Top