Part# needed, 2014-2018 Ram Center Stack Dash Bezel tray

[IwantaRAM]

spent some time looking for a replacement part, can anybody help identify this tray (not the rubber insert)?

thanks in advance.

 

[IRSmart]

You mean this one?





There should be a bunch of these floating around, as it has to get removed to install the AEV switch pod.

 

[WY-Dave]

It's on of them factory rip off parts. Even though it comes off the bezel, you can only order it with the bezel. It was like that for my Jeep when I broke a tab on the light bucket, I had to order the whole assembly


I found this using the 6EW591X9AC part number


https://www.moparpartswebstore.com/.../Instrument-Panel-Trim-Lower/i2365862.html#12

 

[IwantaRAM]

Thanks guys, guess Ill have to keep an eye out for one.

You mean this one?

View attachment 163053

View attachment 163054

There should be a bunch of these floating around, as it has to get removed to install the AEV switch pod.

Thanks, Thats the guy. Maybe Ill email AEV. I checked craigslist, amazon, ebay but nothings available at the moment.

 

[IwantaRAM]

It's on of them factory rip off parts. Even though it comes off the bezel, you can only order it with the bezel. It was like that for my Jeep when I broke a tab on the light bucket, I had to order the whole assembly


I found this using the 6EW591X9AC part number


https://www.moparpartswebstore.com/.../Instrument-Panel-Trim-Lower/i2365862.html#12

I was worried it was an all or nothing deal with the bezel. Guess Ill have to keep my eyes peeled.

Wanted to have a replacement before I ruin my original one. Was planning to fill it with potting compound and mount a ram tough track for phone/tablet/comms.

 

[IRSmart]

Thanks guys, guess Ill have to keep an eye out for one.



Thanks, Thats the guy. Maybe Ill email AEV. I checked craigslist, amazon, ebay but nothings available at the moment.

So, fun fact, I took that photo...

*waits for it*

 

[IRSmart]

I’ll give you a hint: I have an AEV switch pod lol

 

[WY-Dave]

There are mounts that use th cubby

http://www.bayougoatmounts.com/products.html

 

[IwantaRAM]

I’ll give you a hint: I have an AEV switch pod lol

, went right over my head. So.....you ship to CA?

 

[IwantaRAM]

There are mounts that use th cubby

http://www.bayougoatmounts.com/products.html

Thanks for that. I really like the ram mount track since its module and low profile. Plus I have endless connectors and mounts already.

 

[56PW17]

Instead of filling that tray, get the thin metal track and use two cylinder spacers to mount to the stock screw location. Then you can remove it and still have your tray if it doesnt fit your needs. Less work. Just my take on it. GL

 

[IRSmart]

, went right over my head. So.....you ship to CA?

Lol when I saw your post I said to myself “self, I think we have that part just sitting in a plastic bag upstairs”, and I was right. Shoot me a pm with an offer and it’s yours. It’s just taking up space, I don’t need it.