Passenger front Blinker not working? (SOLVED)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

slider11111

Member
Joined
May 3, 2014
Posts
30
Reaction score
2
Ram Year
1998
Engine
5.9
My 2nd gen dodge ram front passenger blinker quit? I checked the bulb and cleaned the contacts amd nothing. I checked the Fuses they were OK. i replaced the Blinker Relay and still nothing I and just changed the Blinker Switch to no avail. Also it doesn't work when the Hazard Switch is turned on. All three of the other Blinkers work just fine. All four light up when the Park lights are on.
 

tron67j

Senior Member
Joined
Oct 14, 2019
Posts
3,055
Reaction score
3,249
Location
Maryland
Ram Year
2018
Engine
6.4 Hemi
Sounds potentially like a broken wire. Have you checked wires with a voltmeter? Take the housing off it and disconnect and see if you are getting power at the wire ends. If not, you will need to trace backwards to find where it is broken or disconnected.
 
Top