PCV valve replacement. 3.6

stenerson

Member
Joined
May 12, 2018
Posts
81
Reaction score
68
Location
New Hampshire, USA
Ram Year
2018
Engine
3.6 VVT
I bought a replacement for this 3.6 but man, that thing is hard to access. I'm assuming I'll have to do it blind and by feel. Has anyone here replaced it? Any tips appreciated.
 

Burla

Senior Member
Military
Joined
Apr 28, 2012
Posts
19,925
Reaction score
35,397
Ram Year
2010 Hemi Reg Cab 4x4
Engine
Hemi
Don't those screw in? Is there two screw holes on your new pcv?
 

Burla

Senior Member
Military
Joined
Apr 28, 2012
Posts
19,925
Reaction score
35,397
Ram Year
2010 Hemi Reg Cab 4x4
Engine
Hemi
Right angle screw driver, ratcheting driver, socket with phillips extension make it easy or even bendable driver will get those screws out.
 
OP
OP
stenerson

stenerson

Member
Joined
May 12, 2018
Posts
81
Reaction score
68
Location
New Hampshire, USA
Ram Year
2018
Engine
3.6 VVT
Don't those screw in? Is there two screw holes on your new pcv?
Access in these trucks (the v6) is pretty tight and can't see what I'm doing. It's at back of engine very close to firewall. Will have to do it by feel. maybe squeeze a mirror back there for some visibility.
 
Last edited:
OP
OP
stenerson

stenerson

Member
Joined
May 12, 2018
Posts
81
Reaction score
68
Location
New Hampshire, USA
Ram Year
2018
Engine
3.6 VVT
Right angle screw driver, ratcheting driver, socket with phillips extension make it easy or even bendable driver will get those screws out.

Thanks. I just bought a Mini Ratchet Wrench Screwdriver Bit Set (low profile). The screws for the PCV valve are T 25. Will give it a shot this weekend when I got time. Thanks.
 

Burla

Senior Member
Military
Joined
Apr 28, 2012
Posts
19,925
Reaction score
35,397
Ram Year
2010 Hemi Reg Cab 4x4
Engine
Hemi
What do I owe nearly all of my dyi jobs too? Youtube, even ram forum members who post dyi on youtube. That is all I got, gl. If that girl can do it, you can do it.


 
Top