jhead7400
Junior Member
- Joined
- Aug 12, 2016
- Posts
- 7
- Reaction score
- 0
- Ram Year
- 2011
- Engine
- hemi 5.7
Hi all new member been reading for a few months now. I have a 2011 ram 1500 5.7 had the failed #8 lifter. So I installed new
Cam
Lifters
Valve springs
O2 sensors
Plugs with copper core ngk
Crank sensor cam sensor
I'm at a lose here. The truck will start however the cel flashes and it will not idle for long. Yet it smooths out and runs like a sewing machine above 1800 rpm. I think it's misfiring on cylinders 4 6 8 and 5 could my timing be off??? I triple checked the timing when I was putting it all back together. Any help would be appreciated
Thanks
Cam
Lifters
Valve springs
O2 sensors
Plugs with copper core ngk
Crank sensor cam sensor
I'm at a lose here. The truck will start however the cel flashes and it will not idle for long. Yet it smooths out and runs like a sewing machine above 1800 rpm. I think it's misfiring on cylinders 4 6 8 and 5 could my timing be off??? I triple checked the timing when I was putting it all back together. Any help would be appreciated
Thanks