I will tell you what i recall from discussions here on the Ramforum & YouTube ( YouTube is your friend )
First of all, it can be done
Who ever you asked at the dealership about it, is simply uninformed
If you look at 3 tradesman trucks, all Gen 4 Tradesman models, 1/2 , 3/4 , 1 ton, all being Crew Cabs
You would notice that the
cabs are identical, except for the mirrors.
If you remove a inner door panel, i would start with the passenger side, just to get a feel for it
As you remove the door panel, be very gentle on the Door Locking Rod, it will bend if you are rough with it
Please buy a Trim tool or a set, you can buy them at Harbor Freight, Tractor Supply, Walmart, any auto parts store, the guy in the video using a screwdriver ruins the plastic & irritates me.
The screws around the door panel have a little washer type thing behind it, use a plastic paint knife to get them out & do NOT drop them in the grass, or else
UPDATE: The dealer programed the truck for the blinkers and puddle lights to work. only cost 1/2hr of labor ($50). Let us take you through an Install of a se...
www.youtube.com
Because i have not seen your setup
You may need to buy 2 door modules, those are the ones that were hidden by the door panel
You may also need to buy the drivers door Master Switch with the Fold Button
I do not recall whether anything has to be programmed to work, like the Power Fold function