Power wagon grille fits 2010-2018 2500

[Cheapstreetduster]

A few people asked if a power wagon grille can be swapped into a non power wagon. The answer is yes! There are powerwagon grilles and there are Rebel grilles they are not the same. A factory power wagon grille from a 4 th gen will fit any 2500 truck 2010-2018. The grill will have to be ground a bit to clear the lower tab mounts but otherwise it will snap right in. There is a tiny bit of mismatch to the contour of the hood but its not rally noticable. I painted the center of mine. I sold my truck so this factory grille is forsale .
So if anyone wants one for there truck this one is available,

 

[Cheapstreetduster]

The center section can be snapped out and painted any color. This one was professionally painted and clear coated with automotive paint. Its called “hot copper” its a metalic gold/orange. This grille forsale is in excellent like new condition sans the professional custom color change.
If the color doesn’t suit you. It can be disassembled and rattle canned any color you want without much effort. I am asking $600. If you have questions about how to make one fit your truck just ask. Or buy this one and snap it in to your truck.

 

[Cheapstreetduster]

Some more close ups

 

[Cheapstreetduster]

The clearence mod needed to make this grille fit. Is done to the 2 lower tabs ( 1 on the left-1on the Right) i took a pair of diagonal cutters, wire cutters and snipped about 1/4” chips off the tabs. This allows it to clear the non power wagon radiator support. Its a minor mod on the back of the grille and cant be seen when its mounted. Nor will it effect re-mounting this back onto an actual powerwagon truck.
SEE THE YELLOW ARROW. Shows where to trim it

 

[Cheapstreetduster]

The miss match to the hood is minor but to point it out. Look in the pictures. Its in the high corners of the grille to hood area. Most never notice it. Unless you look real hard