Pypes 5" Tips

[J Rod]

Sharp back end there. Are those tail lights the black clears? I want the same only the smoked ones. Any error codes?


Sent from my iPhone using Tapatalk

Yes they are black with clear lens and I do get the bulb out warning on startup. I also replaced my reverse and license plate lights with LEDs so I get messages for those too. Much like my wife, I've gotten pretty good at ignoring them

 

[J Rod]

Do these weld up without any major adjustments? I have read that some require the resonator to be moved. Did you have to do anything like that?

I have a welder at home so if I can do it on my own Ill give it a go

I believe they may have had to cut the ball flanges off so they didn't stick out too far past the bumper but there was no issue with the resonators. He did say that he had to weld the inside of the inlet because the actual diameter of the stock pipe behind the flange was about 1/4" smaller than the 2.5" inlet on the tips.

 

[JIMBOX]

My Black Chrome tips are 2.5"x18"x5" and I cut the tailpipe flanges off and had no trouble leaving the RESONATORS in !



Whatever

JIMBO

 

[Mudder]

Yes they are black with clear lens and I do get the bulb out warning on startup. I also replaced my reverse and license plate lights with LEDs so I get messages for those too. Much like my wife, I've gotten pretty good at ignoring them [emoji16]

Do you have the 7" cluster or the base cluster?


Sent from my iPhone using Tapatalk

 

[RamFan30]

That's a nice look! Awesome job!!

Sent from my SAMSUNG-SM-J320A using Tapatalk

 

[J Rod]

Do you have the 7" cluster or the base cluster?


Sent from my iPhone using Tapatalk

It's the 7"

 

[Mudder]

Thanks for the info. Just ordered me up the black smoke ones and the black 3rd brake light.


Sent from my iPhone using Tapatalk

 

[Mbrigh3]

are these the same diameter as moes and Carvens? The pypes tips are
2.5" in X 5" out X 18.

Are moes and Carven's tips 18"L?