Ram Bar Off-Road Light Mounting Bracket

[Hammer757]

Does anyone know if this light bar (ram rebel cab protector rack part # 82215495AB) works on a power wagon? Looking for a light bar that works with the ram boxes on the bed. I would like to mount a KC gravity led light bar above the roof.

Also looking for a light bar to go over the winch similar to the jeep winch guard light mounting bracket. To put two Led pro6 singles (have to decide on best beam pattern).

Last would be two light brackets for around the hood/A-frame for two LED pro6 floodlights (turn to the sides/back for light).

But really having trouble to find a bar that would mount to the bed and work with ram boxes.

 

[IRSmart]

That rack won’t fit. It’s for the 2019 1500, which is a completely different truck than ours. It won’t fit any more than something off of an F150 would.

what do you mean by a light bar that will go over the winch? You mean above it? Just drill it directly to the bumper, it’s steel.

 

[Hammer757]

I figured the 1500 and 2500 beds would be different enough. I was hoping it might work. On the winch more of a bar to lift the lights higher on the bumper. I was thinking about the wrangler were the winch is more exposed on the bumper, which is not the case with the PW.

I'm starting to think I might have to get something fabricated for the light rack to work with the ram boxes.

 

[IRSmart]

Can you give an example of what you’re describing on a Wrangler and how you are hoping to implement that on your truck? I’m having a hard time visualizing it.

 

[56PW17]

Can you give an example of what you’re describing on a Wrangler and how you are hoping to implement that on your truck? I’m having a hard time visualizing it.

To me sounds like he’s looking for a RED design bar or similar for the front bumper lights and a headache rack for the rear in the bed with the lights facing forward over the cab

 

[IRSmart]

To me sounds like he’s looking for a RED design bar or similar for the front bumper lights and a headache rack for the rear in the bed with the lights facing forward over the cab

The headache rack I get (I googled that part number, didn’t know that existed!), I just can’t picture what he’s talking about with the winch lights

 

[Maligator]

The only thing I can think of for lights on the front is this...

https://www.randyellisdesign.com/store/p7/Dodge_2500/3500_Light_Bar_(2010-2018)_#34051/34052.html
Or mount a light bar inside the grill
Hood lights you could use these...

https://www.randyellisdesign.com/store/p67/Dodge_RAM_2500/3500_4th_GEN_Hood_Mounts_#34H.html



Sent from my Pixel 2 XL using Tapatalk

 

[Hammer757]

The wrangler part (82215729)



I think the andyellisdesign.com light bar above will be similar too. Thanks

 

[56PW17]

The headache rack I get (I googled that part number, didn’t know that existed!), I just can’t picture what he’s talking about with the winch lights

That headache rack looks awesome. Wonder if it will work with a ram box?

 

[Hammer757]

That headache rack looks awesome. Wonder if it will work with a ram box?

Yeah I was wondering the same thing. Wonder if the dealership would take one out of the box to try.

 

[Hammer757]

The only thing I can think of for lights on the front is this...

https://www.randyellisdesign.com/store/p7/Dodge_2500/3500_Light_Bar_(2010-2018)_#34051/34052.html
Or mount a light bar inside the grill
Hood lights you could use these...

https://www.randyellisdesign.com/store/p67/Dodge_RAM_2500/3500_4th_GEN_Hood_Mounts_#34H.html



Sent from my Pixel 2 XL using Tapatalk
NBC

He doesn’t have 2019 listed. Says 2018 wonder if there was any changes that would make them not fit.

 

[Trailmaker]

He doesn’t have 2019 listed. Says 2018 wonder if there was any changes that would make them not fit.

It will not fit. The tow hooks are different. I emailed RED last month and they replied with “ one for the 19 PW is in the works”

 

[Hammer757]

Just an update on the cab protector (headache) rack. I reached out to Neil at Maple Offroad and suggested I contact Marcus at Detloff Mfg. They do have a Contour Rack for Rambox, so I've asked if it is possible to just do the front part. Let you know what I hear.

 

[56PW17]

Just an update on the cab protector (headache) rack. I reached out to Neil at Maple Offroad and suggested I contact Marcus at Detloff Mfg. They do have a Contour Rack for Rambox, so I've asked if it is possible to just do the front part. Let you know what I hear.

I’m sure he will make it happen for you.