Ramcharger D150/ pick up D150.

[Cantgetright]

Having a little trouble ordering parts for the RC, replacing all the front steering upper lower ball joints the whole shebang. Had a guy at autozone tell me the parts from the pick up wont fit the RC. but just wanted to get some knowledge before I order 1,000 worth of parts. If it's the same year of D150 the only difference is it's a truck and the other is an SUV right. Little help please

 

[crazzywolfie]

best to measure parts first. while a lot of parts are the same there are a lot of parts used on RC's are heavier duty than what is used on a D150. also you could always try pricing it out on rockauto. might save some money and they always got a 5% off discount code in their thread here in the vendor section.

 

[reek]

was just about to say, check rockauto. their cross reference charts for each part number has been pretty accurate. Been using them myself for well over a decade.

 

[crazzywolfie]

but sometimes there is difference that even rockauto is not aware of. even i have been learning as i go. ramchargers almost seem like they are built like a 3/4ton with larger bolts holding things together but for most other stuff should be pretty standard.