Recommendations before I make lift purchase

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Curlyp

Senior Member
Joined
Mar 17, 2017
Posts
1,189
Reaction score
451
Location
OH
Ram Year
2017
Engine
Hemi 5.7
Hey all! I hope everyone is doing well. It’s been several years since I posted on the forums - life tends to take over!

I am looking to purchase a 6” suspension lift kit in the next couple of days. I’ve wanted to do this when I first purchased my truck, but I didn’t have the extra founds at the time. I currently have Bilsteins 5100 set at 2.8 on the front for a level. I am running 35” Toyo Open Country R/T (35x12.50r20LT) on 20x9 0 offset Cali Offroad Obnoxious wheels.

I’m not really sure which lift kit to go with. I’m looking at Zone, BDS, and Superlift. I was Initially thinking Superlift (since they make the mopar lifts) and the dealership is installing the lift for me (plus I have the Maxcare lifetime warranty).

I see others run a lot of Zone and BDS. I know everyone’s opinion will be different, but I would like some feedback.

In addition to the lift, should I replace the UCAs? What type of shocks should I run in the rear?

Lastly, is the 0 offset okay with a 6” lift?

Thanks!
 

Ohio5pt7

Senior Member
Joined
Jul 26, 2018
Posts
2,207
Reaction score
1,786
Location
Ohio
Ram Year
2018
Engine
5.7 hemi
I did the super lift with the bils. I like it rides nice with the bils. I took the preload spacer out and set bils at 2.5. I have 24x14s and 35s. I get a tiny rub at 1 full turn anything past that or before that nothing I barely touch the lip on the bumper hasn't even work paint if in 15k miles.ac9a49f63bbc945e686d6a684a0b5ebe.jpg

Sent from my KYOCERA-E6920 using Tapatalk
 

Ohio5pt7

Senior Member
Joined
Jul 26, 2018
Posts
2,207
Reaction score
1,786
Location
Ohio
Ram Year
2018
Engine
5.7 hemi
Also as for uca I used RC tubular arms for the 3-6 in lifts works good. I run bils in the rear as well

Sent from my KYOCERA-E6920 using Tapatalk
 
OP
OP
Curlyp

Curlyp

Senior Member
Joined
Mar 17, 2017
Posts
1,189
Reaction score
451
Location
OH
Ram Year
2017
Engine
Hemi 5.7
I did the super lift with the bils. I like it rides nice with the bils. I took the preload spacer out and set bils at 2.5. I have 24x14s and 35s. I get a tiny rub at 1 full turn anything past that or before that nothing I barely touch the lip on the bumper hasn't even work paint if in 15k miles.ac9a49f63bbc945e686d6a684a0b5ebe.jpg

Sent from my KYOCERA-E6920 using Tapatalk

Thanks for the recommendation. Your truck looks nice. Since I have bills in the front would it be best to go with them in the rear or are the Zone Adventure fox shocks good?


Sent from my iPhone using Tapatalk
 

Ohio5pt7

Senior Member
Joined
Jul 26, 2018
Posts
2,207
Reaction score
1,786
Location
Ohio
Ram Year
2018
Engine
5.7 hemi
I've used fox in the past not on this truck but I like them. The bils do really well for a on the road driver though

Sent from my KYOCERA-E6920 using Tapatalk
 

DILLIGAF

Senior Member
Military
Joined
May 28, 2016
Posts
4,274
Reaction score
7,729
Location
Canada
Ram Year
2012
Engine
5.7
BDS is the best lift hands down.

The Superlift is good, but the included endlink extetions are absolute trash so youll need either Maxx endlink or just do what I did and fab some up.
 
OP
OP
Curlyp

Curlyp

Senior Member
Joined
Mar 17, 2017
Posts
1,189
Reaction score
451
Location
OH
Ram Year
2017
Engine
Hemi 5.7
I've used fox in the past not on this truck but I like them. The bils do really well for a on the road driver though

Sent from my KYOCERA-E6920 using Tapatalk

Ok, thank you. My truck is more of a road warrior! She’ll get dirty, but I don’t climb rocks or drive off road. By the way, I’m in Ohio as well.
 

Ohio5pt7

Senior Member
Joined
Jul 26, 2018
Posts
2,207
Reaction score
1,786
Location
Ohio
Ram Year
2018
Engine
5.7 hemi
Ok, thank you. My truck is more of a road warrior! She’ll get dirty, but I don’t climb rocks or drive off road. By the way, I’m in Ohio as well.
Nice what part

Sent from my KYOCERA-E6920 using Tapatalk
 

VelocityC6Z

Senior Member
Military
Joined
Mar 26, 2020
Posts
310
Reaction score
317
Location
Maryland
Ram Year
2016
Engine
5.7
I did Zone on mine. 6", and a 3" body. I have no rubbing at full turn. I went with kings, and my fronts are adjusted for one additional inch of lift on the coil overs, showing about 8 or 9 threads. I'm running 37" tires, -12 offset on 17"x9" wheels
 

Allen1415

Junior Member
Joined
Jul 13, 2020
Posts
10
Reaction score
17
Location
Cincinnati Ohio
Ram Year
2018
Engine
5.7
I went zone 6 inch lift and have no regrets... Zone is BDS sister company. I went with upgraded rear Fox shocks and upper a arms. The ride is great on road. She's a street Queen so I can't say whether it would be nice off road. I'm running 325/50r22 -44 offset. Tires are 13.25 wide so I do get a little rubbing at full turn.

I'm in liberty township... 30 minutes south of Dayton

B135F8F1-D395-4298-8713-0646565C6956.jpeg
 
OP
OP
Curlyp

Curlyp

Senior Member
Joined
Mar 17, 2017
Posts
1,189
Reaction score
451
Location
OH
Ram Year
2017
Engine
Hemi 5.7
I went zone 6 inch lift and have no regrets... Zone is BDS sister company. I went with upgraded rear Fox shocks and upper a arms. The ride is great on road. She's a street Queen so I can't say whether it would be nice off road. I'm running 325/50r22 -44 offset. Tires are 13.25 wide so I do get a little rubbing at full turn.

I'm in liberty township... 30 minutes south of Dayton

View attachment 244975

Very nice. I like the look.

I went with the 6” Superlift and upgraded the rear shocks to the Bilsteins 5100. The only reason I didn’t go with zone was because I could not go with the Bilsteins in the rear. [mention]NickGotExhaust [/mention] mentioned the coils are made specifically to go with the Fox adventure series shocks. Also, I thought it might look odd to have rear Fox shocks and Bilsteins up front.

I also am upgrading the UCA’s with the Zone. I have the UCAs, now I’m just waiting on Superlift to ship my lift kit!

79492d434060e77f0f19e33976e1aeb2.jpg
 

REDE2GO

Senior Member
Joined
Sep 15, 2015
Posts
118
Reaction score
43
Ram Year
2015
Engine
Hemi 5.7
Very nice. I like the look.

I went with the 6” Superlift and upgraded the rear shocks to the Bilsteins 5100. The only reason I didn’t go with zone was because I could not go with the Bilsteins in the rear. [mention]NickGotExhaust [/mention] mentioned the coils are made specifically to go with the Fox adventure series shocks. Also, I thought it might look odd to have rear Fox shocks and Bilsteins up front.

I also am upgrading the UCA’s with the Zone. I have the UCAs, now I’m just waiting on Superlift to ship my lift kit!

79492d434060e77f0f19e33976e1aeb2.jpg


Just got my Zone UCAs today thru Nick. Bringing them to lift shop to get them powder coated to match truck.
 

ehammock

Junior Member
Joined
Apr 27, 2021
Posts
2
Reaction score
3
Location
Livingston, TN
Ram Year
2014
Engine
6.7 Cummins
Don't want to barge in, but I have recently acquired a '14 Ram 3500 Limited.

What are your suggestions for a leveling kit? What is the height difference in front & rear on stock suspension?

Thanks in advance.
 
OP
OP
Curlyp

Curlyp

Senior Member
Joined
Mar 17, 2017
Posts
1,189
Reaction score
451
Location
OH
Ram Year
2017
Engine
Hemi 5.7
Edit: making new thread instead of tagging on here.
 
Last edited:
Top