Remote start and locks not working right

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

wcdaniels

Junior Member
Joined
Nov 1, 2021
Posts
5
Reaction score
1
Location
Mt. Morris, MI
Ram Year
2008
Engine
Hemi 5.7
Hi everyone. Everything was working fine, but then I disconnected my battery for half an hour, and after I reattached it, my remote door locks and starter is not working right. After I turn off the truck, the remote works just as it should. But after the truck is off for a couple of minutes, it doesn’t respond to the locks or the remote start.


Is there a re-pairing procedure or something like that I need to do?
 

Rav3ncroft

Senior Member
Joined
Jun 14, 2020
Posts
794
Reaction score
813
Location
Indiana
Ram Year
2018 RCSB Sport
Engine
5.7 Hemi
Sometimes it takes a little while for everything to get back to normal after disconnecting the battery. I've found after a couple hours and multiple key cycles tend to work for me.
 
OP
OP
W

wcdaniels

Junior Member
Joined
Nov 1, 2021
Posts
5
Reaction score
1
Location
Mt. Morris, MI
Ram Year
2008
Engine
Hemi 5.7
Sometimes it takes a little while for everything to get back to normal after disconnecting the battery. I've found after a couple hours and multiple key cycles tend to work for me.
Thanks, I hadn't had a car that was like that before. It's working perfect now. I guess I just need to be a little more patient.
 
Back
Top