Revmax Thermostat Bypass

[DA67Goatman]

I have the Heater block off plate leftover from the Revmax Thermostat kit. This is for the 8hp70 8 speed transmission to stop the engine coolant heating the trans fluid. Not sure if anyone is interested so PM me an offer and I'll ship it to ya.

 

[DA67Goatman]

That install was tons of fun. There's not a lot of clearance from the front driveshaft and the coolant lines to get the snap ring plies in there in order to remove the factory thermostat. The trans filter was just as tight with the factory crossover pipe running directly under one of the trans pan bolts. I had to use this little wrench with a T-40 torx bit in it to crack the bolt loose then un-thread it by hand cause its so long the bolt and tool don't fit at the same time after a few turns.

 

[DA67Goatman]

Double post