Show me your Onboard Air Setups

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Slider57

Junior Member
Joined
Sep 3, 2020
Posts
1
Reaction score
0
Location
AZ
Ram Year
2020
Engine
Cummins HO
Hey Guys, I'm ordering a 2020 RAM 3500 Cummins HO Laramie 4x4 CrewCab and will want Onboard Air once I have the truck. I'm migrating from a death-wobble F250.

On that truck, my compressor is mounted in the bed, away from the elements with my air tank tucked up along the passenger side frame rail and the air chuck is mounted below the rear bumper.

As I don't have the RAM yet, was wondering how you guys have set it up. TIA
 

18CrewDually

Senior Member
Joined
Nov 17, 2019
Posts
2,012
Reaction score
2,583
Location
U.S.- New Jersey
Ram Year
2018
Engine
Cummins 6.7 H.O.
I did a complete 200psi onboard air system that I mounted up on the frame in between the front of the passenger side rear tire well and the cab. It came with a triple air horn that fit perfectly behind the front bumper on the passenger side. I also use the air for my rear bags. I wired dump & fill solenoids with a wireless remote fob so I can operate them in or out of the truck. I also utilized the garage door Homelink buttons too. I added an airline to the back corner on the bed with an air quick connect so I can fill my 5th wheel pinbox airbag.

Practically everything was from Amazon. The compressor kit, 50amp relay kit, air solenoids (3), Remote fob kit, 1/4" nylon airline, ect.... Might have $300 for everything into it. (Not including the Airlift rear bag kit.)

View attachment 222833

View attachment 222834

View attachment 222835

View attachment 222836

I posted the above on another thread.
 

Bigdaddy

Senior Member
Military
Joined
Dec 13, 2011
Posts
2,422
Reaction score
480
Ram Year
2022 3500 Laramie CCLB
Engine
6.7L Diesel Cummins
This is mines this is underneath the bed just above my spare.DSCN3226.JPG DSCN3227.JPG DSCN3228.JPG DSCN3236.JPG
 

Spelltracer

Junior Member
Joined
Jul 16, 2021
Posts
2
Reaction score
0
Location
MS
Ram Year
2012
Engine
5.7
Bigdaddy- Who makes the valve you have in your pictures? That's a really clean setup.
 
Last edited:

Spelltracer

Junior Member
Joined
Jul 16, 2021
Posts
2
Reaction score
0
Location
MS
Ram Year
2012
Engine
5.7
Thanks 18CrewDually! I looked at the site, and yeah, it's spendy...I think I'll look for that more affordable alternative.
 

18CrewDually

Senior Member
Joined
Nov 17, 2019
Posts
2,012
Reaction score
2,583
Location
U.S.- New Jersey
Ram Year
2018
Engine
Cummins 6.7 H.O.
Top