Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

DANIELC511

Junior Member
Joined
Oct 12, 2024
Posts
7
Reaction score
0
Location
Santa Ana, CA
Ram Year
2010
Engine
5.7
i previously asked the size of my life but I have the measurements now I measured from the exact center of my wheel to fender like it shows in the picture it was 24.5 to 25 inches exactly i thought i was 25 but my tape was down a bit more had to put it exactly in the middle so (24.5 for the front) so what would you think my lift is do notice the rear is taller that I measured it (26.5 in the rear)
 
OP
OP
D

DANIELC511

Junior Member
Joined
Oct 12, 2024
Posts
7
Reaction score
0
Location
Santa Ana, CA
Ram Year
2010
Engine
5.7
Here are some pics
 

Attachments

  • IMG_3895.jpeg
    IMG_3895.jpeg
    228.7 KB · Views: 8
  • IMG_3839.png
    IMG_3839.png
    278 KB · Views: 8
  • IMG_4358.jpeg
    IMG_4358.jpeg
    218.2 KB · Views: 8
  • IMG_4361.jpeg
    IMG_4361.jpeg
    219.5 KB · Views: 7
  • IMG_4362.jpeg
    IMG_4362.jpeg
    206.8 KB · Views: 6
  • IMG_4359.jpeg
    IMG_4359.jpeg
    213.2 KB · Views: 7
  • IMG_4357.jpeg
    IMG_4357.jpeg
    217.6 KB · Views: 8
  • IMG_4356.jpeg
    IMG_4356.jpeg
    212.4 KB · Views: 8
  • 2DEEA5C4-1EA7-46E1-8DDA-C4CFFB99267C.jpeg
    2DEEA5C4-1EA7-46E1-8DDA-C4CFFB99267C.jpeg
    143.8 KB · Views: 7

olyelr

Senior Member
Joined
Nov 18, 2018
Posts
4,890
Reaction score
3,662
Location
Kewadin MI
Ram Year
2016
Engine
6.4
Like i said in your other thread, i would guess around 4”. Any drop brackets for the front diff and lower a-arms? Any spacers under or over the rear springs?
 

Dewbo

Member
Joined
Sep 29, 2023
Posts
33
Reaction score
37
Location
Michigan
Ram Year
2021
Engine
Hemi 5.7
My 3 1/2” fits 35” no issues, but sucks gas big time …….
 

Attachments

  • IMG_1909.jpeg
    IMG_1909.jpeg
    249.7 KB · Views: 4
  • IMG_1875.jpeg
    IMG_1875.jpeg
    217.9 KB · Views: 4
OP
OP
D

DANIELC511

Junior Member
Joined
Oct 12, 2024
Posts
7
Reaction score
0
Location
Santa Ana, CA
Ram Year
2010
Engine
5.7
Like i said in your other thread, i would guess around 4”. Any drop brackets for the front diff and lower a-arms? Any spacers under or over the rear springs?
These are some pics of the rear and front
 

Attachments

  • IMG_4413.jpeg
    IMG_4413.jpeg
    140.9 KB · Views: 6
  • IMG_4412.jpeg
    IMG_4412.jpeg
    157.5 KB · Views: 5
  • IMG_4411.jpeg
    IMG_4411.jpeg
    157.9 KB · Views: 5
  • IMG_4410.jpeg
    IMG_4410.jpeg
    156.8 KB · Views: 5
  • IMG_4409.jpeg
    IMG_4409.jpeg
    127.2 KB · Views: 5
  • IMG_4408.jpeg
    IMG_4408.jpeg
    98.8 KB · Views: 6
  • IMG_4407.jpeg
    IMG_4407.jpeg
    139.9 KB · Views: 7
  • IMG_4406.jpeg
    IMG_4406.jpeg
    174.6 KB · Views: 6
  • IMG_4405.jpeg
    IMG_4405.jpeg
    167.8 KB · Views: 5
  • IMG_4404.jpeg
    IMG_4404.jpeg
    111.8 KB · Views: 6
  • IMG_4401.jpeg
    IMG_4401.jpeg
    95.9 KB · Views: 5
  • IMG_4400.jpeg
    IMG_4400.jpeg
    104.7 KB · Views: 5
  • IMG_4402.jpeg
    IMG_4402.jpeg
    172.6 KB · Views: 6
  • IMG_4403.jpeg
    IMG_4403.jpeg
    131.8 KB · Views: 6

olyelr

Senior Member
Joined
Nov 18, 2018
Posts
4,890
Reaction score
3,662
Location
Kewadin MI
Ram Year
2016
Engine
6.4
Well its obviously a rancho kit, or at least the drop mounts.
 
Top