Still not level

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

BRocks72

Junior Member
Joined
Jul 18, 2021
Posts
11
Reaction score
13
Location
USA
Ram Year
2011
Engine
5.7
I installed a Rough Country 6" lift kit on my 2011 Ram 1500 4WD. The front end is still lower than the back. Not as much rake as before the lift, but still not level. The lift kit instructions say not to use blocks with lift kit. Has anyone else ran into this? What can I do to get the front end up another 1-1 1/2 inches? The lift kit came with new rear shocks and the front coil overs.
 
OP
OP
B

BRocks72

Junior Member
Joined
Jul 18, 2021
Posts
11
Reaction score
13
Location
USA
Ram Year
2011
Engine
5.7
I guess I should say, the struts and shocks are Rough Country too.
 

Quick_Shifter

IG: @ak_trucks_pa
TOTM Winner
TOTY Winner
Supporting Member
Joined
Aug 14, 2018
Posts
4,342
Reaction score
4,346
Location
ASTON,PA
Ram Year
2012
Engine
AK Trucks Tuned 5.7
I guess I should say, the struts and shocks are Rough Country too.
Most people are not familiar with rough country kits as they are ever changing and adding options that quickly get removed due to poor quality and pre mature failures. A picture of your truck would be helpful along with a link to the instructions you mention above. We can help you get set up with achieving your end goal
 

IDSandman

Senior Member
Joined
Jul 10, 2021
Posts
487
Reaction score
663
Location
Idaho
Ram Year
2018
Engine
5.7
If you use your truck as you know, a truck and tow or haul things. You will want about an inch of rake to keep from squatting.
 
Back
Top