Sandhill04
Junior Member
I was thinking about running spacers on my 2015 ram abs wanted to know the stud length so I could get the right size without cutting the studs
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Curious why spacers on a stock set up?
1/4"/6mm spacers on the rear of mine Andrew,with 305/50/20's on the stock 20" Sport rimsinterested in this also.
Looking at adding wheel spares to my stock rims (and RTs) so they sit flush with the OEM fender flares.
Curious what the better ones are and if .25" or .5" is what i should be using?
I remember you used those because of the 2" drop spindles up front. Are they the Bora ones?1/4"/6mm spacers on the rear of mine Andrew, with 305/50/20's on the stock 20" Sport rims
Honestly i'm not sure who's spacers they are,i bought them used off a guy years ago at a Calgary Truck meet,lolI remember you used those because of the 2" drop spindles up front. Are they the Bora ones?
Thinking of going with a .25" set on my RTs with 275's.
Just had the fenders replaced due to rust and will be installing oem flares to protect everything. Don't much care for the wheel/tire recessed in so figured spacers would help that look. My 285 Grabber ATs on the stock 20's will stay inside the fenders during winter.