Suspension Noise

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

PRRAM

Member
Joined
May 22, 2017
Posts
51
Reaction score
14
Ram Year
2014 Laramie Limited
Engine
5.7
75K miles on Limited 4WD have a popping sound in the steering. Ball joints and control arms look tight. I'm thinking tie rods....going to try uploading a movie. Popping occurs when I turn wheel to the right then center right then center.
 
OP
OP
P

PRRAM

Member
Joined
May 22, 2017
Posts
51
Reaction score
14
Ram Year
2014 Laramie Limited
Engine
5.7
Any suggestions on how to upload a video of the sound? This should work... [yt]OANcGLtQGcE[/yt]
 
Last edited by a moderator:

smiley

Senior Member
Joined
Apr 18, 2011
Posts
6,632
Reaction score
2,978
Location
Minot, ND
Ram Year
2014 Ram 2500 Crew
Engine
6.7L Cummins
I think that might be tierods mine was doing that and currently am doing ball joints upper and lower and then inner and outer tierods as well. Figured while I was in there I would do new 5100's too. I think mine was caused by inner tierods.

Does the truck pull to the side when braking?
 
OP
OP
P

PRRAM

Member
Joined
May 22, 2017
Posts
51
Reaction score
14
Ram Year
2014 Laramie Limited
Engine
5.7
Had the wifeee turn the wheel while I grabbed onto the inner tie rods and definitely felt the popping. Hopefully that is the issue but not sure which side so I will replace both with MOOG from Rock Auto. Guess I will do Inners while I am at it.
 
Back
Top