The Stembridge 2021 RAM Classic "Warhawk" Build Thread

[stembridge]

Did another mod today - "leather" seat covers. My wife gets shocked getting out of the truck, so these are more for her than me. "Happy wife, happy life!"





I ended up taking the cover back off the center console - looked too fussy for my tastes, and the lid already had "leather" anyway.

es

 

[Hemi395]

View attachment 505940

Did another mod today - "leather" seat covers. My wife gets shocked getting out of the truck, so these are more for her than me. "Happy wife, happy life!"

View attachment 505939

View attachment 505938

I ended up taking the cover back off the center console - looked too fussy for my tastes, and the lid already had "leather" anyway.

es

Are those Clazzio by any chance?

 

[stembridge]

Are those Clazzio by any chance?

They're CalTrend "Sport" covers. I looked at several options and these were a good balance of cost and aesthetics.

es

 

[ThunderMug95]

Great work! Looks awesome!
Where did you source the jump seat for the swap? And the floor console?

 

[Hemi395]

They're CalTrend "Sport" covers. I looked at several options and these were a good balance of cost and aesthetics.

es

They look great!

 

[stembridge]

Great work! Looks awesome!
Where did you source the jump seat for the swap? And the floor console?

Thank you! The jump seat came from eBay (used). IIRC I ordered the console from one of the Mopar parts sites. I think I noted earlier in this thread that it doesn’t meet up exactly with the lower dash, but you can’t see that unless you get your head in the footwell. Love having the extra cupholders!

es

 

[ThunderMug95]

Thank you! The jump seat came from eBay (used). IIRC I ordered the console from one of the Mopar parts sites. I think I noted earlier in this thread that it doesn’t meet up exactly with the lower dash, but you can’t see that unless you get your head in the footwell. Love having the extra cupholders!

Thank you! Now my search begins!

 

[stembridge]

Here's a link to the floor console: poke here

Note that this console is normally used for diesel trucks with the manual transmission.

HTH,

es

 

[rule18]

Yep, still one of my favorite build threads. Understated, fully functional and built up to your exact specs. Can't ask for much more than that, well done.

 

[stembridge]

My Geolandar X-AT tires have been wearing unevenly and have gotten noisy, so I decided to rotate fronts-to-rears and while I was at it, install the TTC-1211 XHD Rear Coil Kit I had purchased a while back. While I had the wheels down, I checked torque on my spacers, and all was good there.



The springs went in easy, and don't appear to have changed ride height any (I did not take measurements, but now wish I had). We'll see how they do the next time I haul a load.

An alignment will be scheduled shortly, too!

es