Stuffpower
Senior Member
Thanks for the input. I think I’m gonna pull it. Does anyone make gears yet for this truck?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Great looking truck! Thinking of going 37s too and would like to run stock wheels. Mine are 8" and tire store recommends 9" min. What width are your wheels and width of your 37s?I'll never go down from 37's. No real noticeable power loss and pull my dump trailer (full) just fine. I installed the AEV ProCal tuner to change the computer to 37's and had the dealer recalibrate the speedo.
I'm running them on OEM wheels too, and have not had any significant rubbing.
NopeI thought the stock power wagon wheels are 9 inch?..
I would not hesitate to put the typical 37x12.50 on an 8" wide rim. Tire manufacturers generally "recommend" certain width wheels for certain tires, but it is a recommendation and not a requirement. Some big chain places like Tire Discounters may have corporate policies that require them to only mount tires on the "recommended" size wheels for liability reasons. However there are a LOT of people who run outside of that recommendation in regards to tire vs. wheel width recommendations.Great looking truck! Thinking of going 37s too and would like to run stock wheels. Mine are 8" and tire store recommends 9" min. What width are your wheels and width of your 37s?
Thanks,
8" wide OEM Power Wagon wheel. No issues at all. In fact, I had the tires shipped to my dealer and they mounted, balanced and installed them for me.Great looking truck! Thinking of going 37s too and would like to run stock wheels. Mine are 8" and tire store recommends 9" min. What width are your wheels and width of your 37s?
Thanks,
Separately does anyone know if they’re making gears for 2021
Toss it in the bed, bed mount, rear bumper/hitch mount, dont cary one…thats about your only options.Going to order them shortly. What are you guys doing about a spare????
Do you have any pics of your trucks stance? I just ordered the same setup on mine.I have 17x9+18s and had to do a lot of trimming. I have toyo MTs 37x13.5x17" tires. If I had bought KM3s instead, it might have req'd less trimming as the tire is a little shorter. Just my 2 cents.
Do you have any pics of your trucks stance? I just ordered the same setup on mine.
And do they rub on the radius arms?
Rubbing with both the paint and plastic worned off and/or trimmed may lead to some bare metal being exposed which quickly becomes a mineable iron around my region.So from what I’m reading here 37” tires will fit under a stock power wagon with mineable rubbing ??