TIPM problems/ac

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

lpennock

Senior Member
Joined
Nov 17, 2018
Posts
494
Reaction score
338
Location
Phoenix, AZ
Ram Year
2018
Engine
5.9L & 6.7L Cummins
What year truck?

Sent from my SM-T350 using Tapatalk
 

crazykid1994

Senior Member
Joined
Sep 21, 2013
Posts
5,041
Reaction score
4,969
Location
Florida
Ram Year
2017
Engine
Hemi 5.7
Check line pressure? If pressure doesn’t read proper it won’t turn on.
 

3pedals

Senior Member
Joined
May 28, 2020
Posts
184
Reaction score
89
Location
Central Valley
Ram Year
2008
Engine
4.7
In my truck, the AC button would not light up and the AC wouldn’t turn on. Tried out a spare climate panel from junkyard (before buying) and didn’t fix problem.

Reman tipm from summit racing and all is well again.
 
OP
OP
B

buddy0

Junior Member
Joined
Mar 16, 2019
Posts
4
Reaction score
0
Location
ridgecreast ca
Ram Year
2007
Engine
5.9 CUMMINS
07 ram. run 12 volt to compressor and runs fine. also installed reman tipnm and reprogramed
 

lpennock

Senior Member
Joined
Nov 17, 2018
Posts
494
Reaction score
338
Location
Phoenix, AZ
Ram Year
2018
Engine
5.9L & 6.7L Cummins
Check line pressure? If pressure doesn’t read proper it won’t turn on.
This. If line pressure is good you made need to reset the TIPM by clearing the Body Module codes with AlfaOBD.

Sent from my SM-T350 using Tapatalk
 

ljonSFCA

Junior Member
Joined
May 9, 2018
Posts
9
Reaction score
0
Location
CA
Ram Year
2003
Engine
5.7 hemi
tried adjusting steering wheel position? or even better pop open cover under the steering wheel, and wiggle the ignition switch on the dirver's left of the column.. opposite the key. if AC starts working the switch is bad, fried pin common problem..
 
Top