Tranny issues

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Kmken

Junior Member
Joined
May 18, 2022
Posts
1
Reaction score
0
Location
California
Ram Year
91
Engine
5.2 318
Have a 91 dodge ram van B250 5.2 318 just replaced the torque converter and the position crank sensor will go into rev but not d or 2 or 1. Plz help its not a fluid issue
 

Skatulaki

Senior Member
Military
Joined
Nov 22, 2019
Posts
253
Reaction score
83
Location
Green Cove Springs
Ram Year
2002 1500
Engine
5.9 liter 360
My guess is that something in the linkage was not put back together correctly. Check the shift cable and the linkage, As long as you have not dropped the valve body, you should be able to cycle the gears by hand, and move the shift lever to the right position.
 
Top