transfercase diagram

[Brandon-w]

That's what I was thinking too. I've left it on a few times already. [emoji1787]

Sent from my SM-A530W using Tapatalk

 

[Hemi395]

Idk I see the reasoning behind a 10 min timer but I think I would find that kinda annoying. I was planning on mounting the switch near my 4wd switch so maybe a light up switch so it's obvious it's on? Or make it an option?

 

[Hemi395]

That's what I was thinking too. I've left it on a few times already. [emoji1787]

Sent from my SM-A530W using Tapatalk

So does it bind like a traditional Tcase when it's left on?

 

[Brandon-w]

Yeah I agree with the light up switch. Mine lites up but it's kinda hidden away. There will be a few options. I'll Send pics of my switch and some ideas I'm Thinking of for switches. The second pic is just the adhesive led stick on switch for those of you who don't want to hard mount a switch. Just run ur wires peel stick and add power and ground. And then I'll go with conventional rockers for those of you who want hard mount. My current switch is the marine led rocker threw it together with what I had but I'd likely go. With a more lower profile round rocker switch, round because it's easier to just drill a hole and install.
Been looking for a 3 way rocker that lights up for the t case switch and 4low mod but have yet to find one.

Sent from my SM-A530W using Tapatalk

 

[Brandon-w]

So does it bind like a traditional Tcase when it's left on?

It doesn't seem to bind its hard to tell though I Havnt really had any dry pavement to try it on around here.

Sent from my SM-A530W using Tapatalk

 

[Hemi395]

Yeah I agree with the light up switch. Mine lites up but it's kinda hidden away. There will be a few options. I'll Send pics of my switch and some ideas I'm Thinking of for switches. The second pic is just the adhesive led stick on switch for those of you who don't want to hard mount a switch. Just run ur wires peel stick and add power and ground. And then I'll go with conventional rockers for those of you who want hard mount. My current switch is the marine led rocker threw it together with what I had but I'd likely go. With a more lower profile round rocker switch, round because it's easier to just drill a hole and install.
Been looking for a 3 way rocker that lights up for the t case switch and 4low mod but have yet to find one.

Sent from my SM-A530W using Tapatalk

That's awesome man can't wait to do this install!

 

[Brandon-w]

It's definately handy. We don't have town water where I live so I haul a 1200gal water tank, today I got into about 1 1/2 feet of with the tank loaded and she clawed her way out. I'd definately get further with better tires mine are skis at 13.5 inches wide and not so much tread. I should have took pictures but I was in a rush. I'm excited to get this going for you guys. Just waiting on plug samples for The bcm. If they work I'll be getting 100 (minimum order) but I have a feeling these will sell.
[emoji846]

If dodge didn't change their blowe motor resistor connectors so much I could set it up as plug and play right off that just clip on and go.

 

[joshuaeb09]

Yeah I agree with the light up switch. Mine lites up but it's kinda hidden away. There will be a few options. I'll Send pics of my switch and some ideas I'm Thinking of for switches. The second pic is just the adhesive led stick on switch for those of you who don't want to hard mount a switch. Just run ur wires peel stick and add power and ground. And then I'll go with conventional rockers for those of you who want hard mount. My current switch is the marine led rocker threw it together with what I had but I'd likely go. With a more lower profile round rocker switch, round because it's easier to just drill a hole and install.
Been looking for a 3 way rocker that lights up for the t case switch and 4low mod but have yet to find one.

Sent from my SM-A530W using Tapatalk

I haven't looked behind my dash in a while, but I wonder if there's enough space below the 4x4 buttons for one of these.

https://www.amazon.com/API-ELE-warranty-Waterproof-Stainless-Self-locking/dp/B07931H6FZ

 

[Brandon-w]

I haven't looked behind my dash in a while, but I wonder if there's enough space below the 4x4 buttons for one of these.

https://www.amazon.com/API-ELE-warranty-Waterproof-Stainless-Self-locking/dp/B07931H6FZ

There could very well be. I Havnt been that far into it in awhyle either. I would assume is there isn't dash supports in the way it would fit.

Sent from my SM-A530W using Tapatalk

 

[Hemi395]

My truck has the 44-44 and a 6 speed so I have this 4wd switch. I was planning on mounting the switch in the space below the dial (circled part).

But the 8 speed 4wd switch has the 4wd buttons in that space....

 

[Brandon-w]

Mine is the 8 speed but I have about 2-3 inches under the switches to add another.

Sent from my SM-A530W using Tapatalk

 

[Hemi395]

Mine is the 8 speed but I have about 2-3 inches under the switches to add another.

Sent from my SM-A530W using Tapatalk

So that would work too

 

[joshuaeb09]

So that would work too

Yea I'll have to find time to look behind mine in that area. I need to update my Maestro anyways so maybe I'll find time this weekend.

 

[Brandon-w]

I Think so. Like I said I'll make a harness with a switch that sticks on too because some people don't like cutting stuff like that or don't have the aptitude to do such things or just lack Tooling.

Sent from my SM-A530W using Tapatalk

 

[Hemi395]

I Think so. Like I said I'll make a harness with a switch that sticks on too because some people don't like cutting stuff like that or don't have the aptitude to do such things or just lack Tooling.

Sent from my SM-A530W using Tapatalk

I like that idea. Then it's completely removable if you have to bring the truck in for warranty work or if you sell the truck.

 

[Luis dodge]

Did u guys ever make this. Is it for sale

 

[Hemi395]

@Brandon-w is working on it!

 

[Brandon-w]

Did u guys ever make this. Is it for sale

Hey Luis! I am currently waiting on sample plugs so this can plug Into the 4x4 module, if the sample plugs work I will order a large quantity and be putting this into full production. I'll post on here when im taking orders. Make sure to follow this thread.
Thanks for all the support guys!
Brandon.

Sent from my SM-A530W using Tapatalk

 

[Luis dodge]

Brandon w sorry for the late response. Thanks for the reply. I just found out I burnt my t case clutch. From what I been reading lots of people going with the BW 44-45 and have had good results. I think I might go that route. Hopefully I won't regret it lol. Again thanks for the reply. Have a good one.

 

[Brandon-w]

Brandon w sorry for the late response. Thanks for the reply. I just found out I burnt my t case clutch. From what I been reading lots of people going with the BW 44-45 and have had good results. I think I might go that route. Hopefully I won't regret it lol. Again thanks for the reply. Have a good one.

No worries. Rockland makes super heavy duty clutches and sells them pretty cheap. Also a very easy install, just food for thought. [emoji106]

Sent from my SM-A530W using Tapatalk