Hey all. I've had my Bilstein lift for a few years now and run some 35/12.50/18 AT tires with roughly 15k miles on them, and I really never paid attention to it since I used the most reliable offroad installer in a wide swath of our area. I've noticed over the past 3 to 4 months that when I'm turning under acceleration, either right or left, from a dead stop it feels like the truck is in all wheel drive. The tires give a vibration through the steering wheel like the outside bites on my AT tires are gripping the road. The truck has 78k miles, mostly road but some beach driving.
Two pics each with questions.
1) the one with my finger pointing is it common for the from sway bar to look like it adjust from side to side? The bushings don't look dry rotted, breaking apart, or too squished.
2) Drawing a blank on what the part is called that is circled in yellow. I know it's not appropriate for the boot to be squished/crushed like that. Recommendations on how to upgrade that part and any other OEM you think is required to make my front end safer?
Thanks in advance.
Two pics each with questions.
1) the one with my finger pointing is it common for the from sway bar to look like it adjust from side to side? The bushings don't look dry rotted, breaking apart, or too squished.
2) Drawing a blank on what the part is called that is circled in yellow. I know it's not appropriate for the boot to be squished/crushed like that. Recommendations on how to upgrade that part and any other OEM you think is required to make my front end safer?
Thanks in advance.