Well, shes lifted 2.0...

[Graygoose]

For those that know me, I had a 2015 Ram 1500 CC, lifted on Nitto Ridge Grapplers....

well got the 2019 Classic done , dropped it off yesterday, picked her up at noon today. Shop is about an hour from me.
So since I bought Dec 29th...tinted windows, added Ionic 4" stainless nerf bars, and Maxtrac 4.5"/3" list kit. Man this truck rides like factory!!
Even the shop said it was a very simple install, alignment spec'd in!
The tires are Nitto Ridge Grappler 35x12.50, did 5 and 5 wheels. Wanted a fullsize spare/replacement.
The rims are new for 2019, they are the MO970 in all gloss black. Same pattern as my old wheels, but all black.
Tonneau will be here tomorrow, so spare will go in bed locked.

Next is a Bedrug XL, Magnaflow #16869 catback, Pedal Commander and a simple audio system

 

[quietpeen]

Looks great

 

[Graygoose]

Thank you sir!!

 

[smithwessn]

Looks awesome!

 

[HEMI_Finn]

Looking good, but I expected no less! I am curious though, what do you consider "a simple audio system"?

Sent from my SM-G950U1 using Tapatalk

 

[Dennis mo]

Do u have a side shot of tires/body


Sent from my iPhone using Tapatalk

 

[Itsme71190]

Thank you sir!!

cost? did they have to modify anything under the truck?

 

[JB1]

Looks great, very proportional

we need more pics

 

[Itsme71190]

2wd only?

 

[HDHNTER]

Sharp!!

 

[JB1]

What’s the wheel width and offset?

 

[co-pilot]

What’s the wheel width and offset?

Looks great!!!!!!!!!!!................I would like to know this also?

 

[mboymopar]

Sets great!

 

[Graygoose]

Thanks guys, that pic what just right after I picked it up and was walking back into work.
Here are a few more, pulled into building to adjust headlights last night.

Its the same Maxtrac 4.5/3" lift.

The wheels are 20x10 with a -24.

I mean it BARELY got in the garage, so now may need to modify the shark fin a little, just to add more clearance. Anyone have input?


The system, I will retain the 8.4, and use our Kicker KEY 180.4 4 channel DSP amp, and change doors out to our QSS674, mount mid in door, tweeter in dash. The DSP will really clean up the imaging. May add a PAC AMP pro just in case, but haven't fully investigated. Then a small sealed CWR 10" with a CXA4001 400 watt amp.

 

[Graygoose]

And yes, 2wd, and no, no mods at all. A six hour install was all it took, and that was also mounting and balancing 5 wheels and full alignment.

 

[Hawaii_Built]

Great looking truck! Did that 35" spare fit okay under your bed?

 

[Graygoose]

Thank you, no it wont. Even on my 2015, I had a 315/35/17 and it didn't. So under my tonneau, I have a 5' bike locking cable, I lock it to a loop in the bed.

 

[SJP_1809]

Thanks guys, that pic what just right after I picked it up and was walking back into work.
Here are a few more, pulled into building to adjust headlights last night.

Its the same Maxtrac 4.5/3" lift.

The wheels are 20x10 with a -24.

I mean it BARELY got in the garage, so now may need to modify the shark fin a little, just to add more clearance. Anyone have input?


The system, I will retain the 8.4, and use our Kicker KEY 180.4 4 channel DSP amp, and change doors out to our QSS674, mount mid in door, tweeter in dash. The DSP will really clean up the imaging. May add a PAC AMP pro just in case, but haven't fully investigated. Then a small sealed CWR 10" with a CXA4001 400 watt amp.

View attachment 155560

View attachment 155561

View attachment 155562

View attachment 155563

Damn that's a sharp truck!!

 

[stimpy433]

Looks great, and the only thing that would made it look better is if it was Bright Silver like your old one!!!! Hahaha!!!!

 

[Graygoose]

thanks SJP.....Thomasville, GA....I have a buddy that does/ or used to run a audio shop there.


Stimpy, then wheel shopping would have been easier haha