What did you do with your 4th Gen this week?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

buckeyexx

Senior Member
Joined
Jan 25, 2015
Posts
677
Reaction score
704
Location
Ohio
Ram Year
2016 Power Wagon
Engine
6.4 Hemi
Installed new led low beam bulbs to replace the ****** halogen bulbs. We will see how well they do but they have to be better as long as they hold up.
 

Ken Camp

Member
Military
Joined
Oct 25, 2021
Posts
46
Reaction score
58
Location
Northwest PA
Ram Year
2018
Engine
3.6L Pentastar VVT V6
Haven't had a chance to drive my 2018 in real good snow since I bought it in October, so had to take it out for a drive in good old fashion snow storm (1st good snow in years, 14 inches) and it did great. Now to get all the filth cleaned off it LOL.
 

18CrewDually

Senior Member
Joined
Nov 17, 2019
Posts
2,012
Reaction score
2,583
Location
U.S.- New Jersey
Ram Year
2018
Engine
Cummins 6.7 H.O.
After our last big snowstorm I noticed snow was getting in my box via the tailgate and I can’t stand that so I added a tailgate seal kit. Don’t mind the crooked section that runs along the bottom, I straightened that part out.

I'm with you keeping water out. I found that if you go to your local Harley Davidson Dealer and get these rubber plugs they fit perfect in the stake pocket holes.
20210312_121800.jpg
20210312_123638.jpg20210312_123655.jpg
SOLID PLUGS ABOVE

If you need to run through with a hose or wire for aux fuel tank like I do, they have the one below for that.
20210312_140706.jpg20210312_140713.jpg
 

Gregdad

Senior Member
Joined
Aug 14, 2017
Posts
646
Reaction score
1,063
Location
Fort St. John BC, Canada
Ram Year
2022
Engine
5.7

Attachments

  • 33298D54-5E48-47D2-A68F-6E17BA6C9E7B.jpeg
    33298D54-5E48-47D2-A68F-6E17BA6C9E7B.jpeg
    275.4 KB · Views: 5

ClassicJoe

Senior Member
Joined
Feb 14, 2021
Posts
163
Reaction score
91
Location
NC
Ram Year
2019
Engine
Hemi 5.7
I drove to the farm and took down bow stands. I also added a Reese three ball hitch.
 

DanHate

Junior Member
Joined
Oct 29, 2017
Posts
14
Reaction score
4
Ram Year
2016
Engine
Hemi
Hi WY-Dave, Do you have any pics of how you tapped into the cigarette wiring? Did you splice into the hot leg and screw the ground to a part of the metal structure in the

Easiest and vest way to tap into any of the cigarette wiring harnesses is to get a T harness. Just unplug the harness from the back if the power point, clip in the T harness on both sides and you are good to go. Hardest part is getting your hand around all the dash nonsense.

 

WY-Dave

Senior Member
Military
Joined
Jan 22, 2019
Posts
4,226
Reaction score
18,219
Location
Cheyenne, WY
Ram Year
2018 2500
Engine
6.7 CTD
Hi WY-Dave, Do you have any pics of how you tapped into the cigarette wiring? Did you splice into the hot leg and screw the ground to a part of the metal structure in the dash?

Since I was there, I tapped into both

1642564904159.png
 
Top