Wheel Help! Offset? Bolt Pattern?

[Devin Taetsch]

Hello,
I am currently running 35’s on a set of wheels that came with the truck when I purchased it. However I recently came across a set of wheels that I am very interested in purchasing... I believe the wheel I came across is a 20x10 but I am unsure of its offset.. Or what bolt pattern to look for when purchasing. Can someone please lead me in the right direction of what offset and bolt pattern I need to work with my truck?

kind regards,
Devin Taetsch

 

[Devin Taetsch]

This is the tire specs the wheel was running. Not sure if this helps.

 

[Ohio5pt7]

5x5.5 is your pattern. As far as offset need more info? Stock? Level? Lift?

Sent from my SAMSUNG-SM-G891A using Tapatalk all grammar errors brought you by fat fingers and auto correct.

 

[kad]

My 2014 Express CC 4x4 has the below oem wheel specs. Not 100% certain a 2015 would be the same, but I think they are.

Wheels - Mopar 1UB17RXFAC
20x8.0 Semi-Gloss Black Aluminum
Offset 19.5 mm
Backspace 5.25"

Lug: 14mm x 1.50
Lug Pattern: 5 x 139.7
Lug Torque: 125 ft/lb

-K

 

[Devin Taetsch]

5x5.5 is your pattern. As far as offset need more info? Stock? Level? Lift?

Sent from my SAMSUNG-SM-G891A using Tapatalk all grammar errors brought you by fat fingers and auto correct.

I am not sure if it is currently lifted.. I am running 35’s without any issues. Here is a picture of my truck currently. It seems like at a minimum there is a leveling kit? However I am not apposed to also purchasing a leveling kit to make a better wheel/tire combo work..

 

[Ohio5pt7]

That's at a minimum leveled in that case any 10 wide and 35 should work. Check out customoffsets.com

Sent from my SAMSUNG-SM-G891A using Tapatalk all grammar errors brought you by fat fingers and auto correct.

 

[Addicted2fishing]

The wheels you currently have in that pic look like 0 offset. The less offset the more aggressive the wheels will stick out.

If 35’s fit with no rubbing and with your current offset look for 0-and below. -6 to -12 offset will be subtle. -24, -44 etc will be a very aggressive fit.

5x139.7 or 5x5.5 is bolt pattern.


60% of the time it works every time!

 

[Devin Taetsch]

Thanks you guys for the feedback!!

 

[BobSacomano]

That's at a minimum leveled in that case any 10 wide and 35 should work. Check out customoffsets.com

Sent from my SAMSUNG-SM-G891A using Tapatalk all grammar errors brought you by

Thanks you guys for the feedback!!

And as an offset example, mine are -44 and they stick out this far.

Wind deflectors

• BobSacomano
• May 12, 2020

The closer to zero you get, the less they stick out.